3M 7000124879 Masking Tape 12mm 60yd 4.4mil Tan

Product Description

The 3M 7000124879 is a general-purpose paper masking tape designed for light- and medium-duty applications across trades and industrial work environments. The tape measures 12 mm wide and 60 yards long with a 4.4 mil thickness. It uses a rubber adhesive that bonds to a range of surfaces and releases cleanly without leaving significant residue. Rated for use up to 200 degrees F, it holds up in typical paint masking and bundling scenarios where moderate heat exposure is expected. Licensed tradespeople, painters, and technicians reach for this roll when a reliable, cost-effective masking solution is needed.

This tape is suited for bundling, holding, paint masking, and sealing tasks in both residential and light commercial settings. It performs well on smooth and semi-smooth surfaces during painting prep, surface protection, and temporary fastening. The tan paper backing conforms readily to straight runs and gentle curves, making it practical for quick masking work on trim, ductwork, piping, and fixtures. A tensile strength of 19 lb per inch keeps the tape intact during normal handling and removal.

Key Features

• Rubber adhesive provides reliable tack and clean removal on most surfaces
• Rated up to 200 degrees F for use in moderate-heat environments
• 4.4 mil thickness balances conformability with tear resistance
• 12 mm width suits narrow masking lines and tight work areas
• 60-yard roll length reduces mid-job roll changes on larger projects
• Suitable for bundling, holding, paint masking, and sealing tasks

Compatibility

Designed as a general-purpose masking tape for light- and medium-duty applications; compatible with standard tape dispensers accepting 12 mm rolls.

Installation Notes

Apply to clean, dry surfaces for best adhesion and cleanest removal. Remove tape promptly after painting or masking work is complete to reduce the risk of adhesive transfer, particularly on freshly cured surfaces. No special tools are required; standard tape dispensers or hand-tearing is sufficient for most applications.