3M 7000121260 Epoxy Adhesive DP190 Translucent 200 Ml

Product Description

The 3M 7000121260 is a flexible, translucent, two-part epoxy adhesive sold in a 200 mL cartridge. It uses a 1:1 mix ratio and delivers approximately 80 minutes of working time after mixing, with handling strength reached in approximately 6 hours. The low viscosity formula dispenses cleanly and flows into joint gaps without requiring heavy application pressure. It bonds to metals, ceramics, wood, and many plastics, making it a practical choice for repair, fabrication, and assembly work across maintenance, electrical, and general trade applications. Dispensing requires a 3M Scotch-Weld EPX 200 mL applicator and compatible mix nozzles, neither of which is included with this cartridge.

This adhesive is suited for trade and industrial applications where a flexible bond line is needed to accommodate vibration, thermal cycling, or dissimilar material joints. Common uses include bonding metal brackets to composite panels, sealing ceramic components, and securing plastic assemblies in HVAC, electrical enclosure, and general mechanical service work. Its translucent cure color keeps bonded assemblies visually clean. The 200 mL cartridge size is appropriate for job-site use or bench repair work where moderate quantities are needed per application session.

Key Features

• 1:1 mix ratio simplifies metering and reduces dispensing errors
• 80-minute work life allows time for part positioning and fixturing
• Handling strength achieved in approximately 6 hours after mixing
• Low viscosity formula flows easily for consistent joint fill
• Flexible cured bond accommodates vibration and thermal movement
• Translucent cure color suits visible or cosmetic bond lines

Compatibility

Bonds to metals, ceramics, wood, and many plastics. Requires a 3M Scotch-Weld EPX 200 mL applicator and compatible mix nozzles for dispensing, sold separately.

Installation Notes

Surface preparation is critical for epoxy adhesive performance — clean and degrease all bonding surfaces before application. Mix nozzles must be seated correctly in the EPX applicator before dispensing to ensure the 1:1 ratio is maintained throughout the shot. Do not attempt to extend pot life by refrigerating mixed adhesive in the nozzle. Allow the full cure time to elapse before applying load to the bonded assembly.

Technical Specifications

• Mix Ratio: 1:1
• Work Life: 80 minutes
• Handling Strength: Approximately 6 hours
• Viscosity: Low
• Color: Translucent
• Volume: 200 mL
• Weight: 0.74 pounds
• Unit of Measure: Each

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7000121260