3M 7000046013 Scotch-brite Cs-dc 5 Inch Abrasive Disc

Product Description

The 3M 7000046013 is a Scotch-Brite CS-DC Clean and Strip non-woven abrasive disc engineered for demanding metalworking surface preparation tasks. At 5 inches in diameter, it uses extra coarse (XCS) silicon carbide abrasive to cut aggressively through paint, rust, coatings, and corrosion while preserving the underlying geometry of the workpiece. The non-woven web construction resists loading and heat buildup, delivering consistent cutting performance and uniform wear from first use to last. Metal fabricators, maintenance technicians, and surface prep operators rely on this disc for stripping and prepping surfaces before coating, welding, or finishing operations.

This disc is suited for surface preparation in both residential and commercial metalworking environments. Typical applications include paint and coating removal, rust and corrosion stripping, and pre-weld or pre-coat surface cleaning on metal substrates. The thin profile allows access into tight corners and contoured areas where wire brushes or flat grinding wheels cannot reach. It is used on angle grinders and compatible disc tools configured for 5-inch accessories. Minimum order quantity is 25 discs per unit of measure.

Key Features

• Extra coarse silicon carbide abrasive delivers aggressive cutting action on paint, rust, and coatings
• Non-woven web construction resists smearing, loading, and heat for consistent results throughout disc life
• Preserves workpiece geometry during stripping and surface prep operations
• Thin disc profile accesses tight corners and contoured surfaces more effectively than wire brushes
• Provides greater surface area contact compared to wire brush alternatives
• Uniform wear pattern over the full service life of the disc

Compatibility

Designed for use with angle grinders and disc tools that accept 5-inch non-woven abrasive discs in a center-hole or disc configuration appropriate for the CS-DC style.

Installation Notes

Installation and mounting should be performed by a qualified operator following the tool manufacturer's instructions and applicable ANSI safety standards for abrasive products. Always power down and disconnect the grinder before mounting or removing a disc. Inspect the disc for damage before each use and never exceed the maximum RPM rating of the disc or tool. Wear appropriate personal protective equipment including eye protection and gloves during operation.

Technical Specifications

• Disc Diameter: 5 inches
• Abrasive Material: Silicon Carbide
• Grade: Extra Coarse (XCS)
• Construction: Non-Woven Web
• Weight: 0.14 pounds
• Package Dimensions: 11 x 11.2 x 5.8 inches
• Unit of Measure: Each
• Minimum Order Quantity: 25
• UPC: 00048011009438

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7000046013