MAGNASPHERE

Product DescriptionThe MAGNASPHERE CORP HS-L1.5-111-C36-L-4 is a special application magnetic contact switch supplied as a single unit with a 36-inch cable lead. Magnetic contact switches of this type are used in security, access control, and monitoring circuits to detect the open or closed state...

Product Description The MAGNASPHERE CORP HSS-1384 is a test magnet designed for use with L2c tamper switch assemblies. It provides a controlled magnetic field used to actuate and verify the operation of tamper switches during testing and commissioning. Security installers and low-voltage technicians use...

Product Description The MAGNASPHERE CORP HSS-1450-L2D-010 is a roll-up door bracket designed to mount the HSS L2D magnetic security sensor on commercial and industrial roll-up doors. This bracket positions the sensor correctly relative to the door surface, allowing the HSS L2D to detect open,...

Product Description The MAGNASPHERE CORP HSS-1450-L2S-000 is a right-side rollup door bracket designed for use with indoor housing enclosures. This bracket provides the structural mounting support needed to secure a rollup door panel on the right-side position of a compatible housing assembly. It is...

Product Description The MAGNASPHERE CORP HSS-1451-L2D-000 is a left-hand camera bracket assembly designed for overhead door (OHD) mounting applications. This bracket provides a stable, fixed mounting point for compatible camera or sensor hardware in access control and security installations. It is intended for use...

Product DescriptionThe MAGNASPHERE CORP HSS-1451-L2S-011 is a rollup door bracket kit configured for left-side premount installation. Bracket kits in this category are used to mount sensing or alarm hardware to rollup door frames, providing a stable, repeatable mounting position for the associated sensor or...

Product Description The MAGNASPHERE CORP HSS-1670-L2D-010 is an overhead door bracket assembly paired with an HSS special application magnetic contact. This unit is designed to monitor the open and closed position of overhead doors in commercial, industrial, and access-control installations. The bracket positions the...

Product DescriptionThe MAGNASPHERE CORP HSS-L2C-101 is a Level 2 single alarm contact designed for special application security and sensing installations. This recessed contact operates as a discrete magnetic switch, triggering an alarm signal when a monitored door, window, or access panel is opened or...

Product Description The MAGNASPHERE CORP HSS-L2C-111-A is a recessed security contact designed for special application installations where reliable door or window position sensing is required. This component mounts flush within the door frame or surface cavity, making it suited for high-security and low-profile installations....

Product DescriptionThe MAGNASPHERE CORP HSS-L2D-001 is a special application magnetic contact with a 1k series embedded end-of-line (EOL) resistor. The integrated resistor is built directly into the contact housing, eliminating the need for a separate inline resistor at the zone termination. This component is...

Product DescriptionThe MAGNASPHERE CORP HSS-L2D-002 is a special application contact designed for use in security and alarm system wiring configurations. This component supports a 1K series parallel embedded end-of-line (EOL) resistor circuit topology, which is a standard method used in supervised alarm loops to...

Product DescriptionThe MAGNASPHERE CORP HSS-L2D-004 is a parallel embed end-of-line (EOL) resistor contact designed for special application security and alarm circuits. EOL resistors are installed at the end of a supervised loop to allow a control panel to distinguish between a normal, open, or...

Product Description The MAGNASPHERE CORP HSS-L2D-008 is a dual contact switch with tamper detection, designed for special application security and access control installations. It operates as part of the 820 Series product family, providing two independent contact circuits in a single housing along with...

Product Description The MAGNASPHERE CORP HSS-L2D-800 is a conduit-mount dual alarm contact designed for special application security and alarm systems. This unit provides two closed-loop circuits in a single housing, allowing monitoring of two independent zones or providing redundant loop coverage within one device....

Product Description The MAGNASPHERE CORP HSS-L2S-002-C48-L5.0 is a 4-arm cable assembly designed for miscellaneous power applications in trade and industrial settings. This component provides multi-branch cable routing from a single connection point, supporting organized and reliable power distribution in electrical and control system installations....

Product DescriptionThe MAGNASPHERE CORP HSS-L2S-800 is a high-security single-channel alarm surface mount contact designed for use in intrusion detection and access control systems. This unit mounts directly to door and window frames, sensing open and closed states and reporting status to an alarm control...

Product DescriptionThe MAGNASPHERE CORP MSS-106S-C36-L3.5 is a closed-loop overhead door contact designed for special-application security and access-control installations. This rail-grey-finished magnetic contact monitors the open or closed status of overhead doors and transmits that status signal to a connected control panel or monitoring system....

Product DescriptionThe MAGNASPHERE CORP MSS-201C-BROWN is a recessed magnetic contact designed for closed-loop security and access control wiring applications. Finished in brown to blend with common door and frame materials, this unit fits a standard 3/4-inch recessed bore and ships with 12-inch leads pre-attached...

Product DescriptionThe MAGNASPHERE CORP MSS-201C-GRAY is a recessed magnetic contact designed for closed-loop security and access-control circuit applications. Supplied in gray housing, this unit fits a standard 3/4-inch recessed bore and ships with 12-inch leads for direct termination to control panels or alarm wiring....

Product Description The MAGNASPHERE CORP MSS-201C-WHT-FIRE is a recessed magnetic contact designed for fire alarm and security detection systems. This normally-closed contact ships with 12-inch leads and mounts in a standard 3/4-inch diameter bore, making it a direct-fit option for door and window frame...