OATEY

Product Description The OATEY PP850X68 is a 3/4-inch hose cap with an included washer, designed to terminate or temporarily seal a standard garden hose end. The cap threads onto the female end of a hose, stopping flow and protecting the fitting when the hose...

Product Description The OATEY PP85415 is an all-purpose brush set used for applying solvent cement, primer, and flux to pipe fittings and connections during plumbing and mechanical installations. Sold as a set of two brushes per card, this product is a standard consumable kept...

Product DescriptionThe OATEY PP8542 is a pipe joint compound packaged in a 2 oz container, sold one unit per card. Pipe joint compound is applied to threaded pipe connections to seal against leaks and prevent galling during assembly. It is compatible with a range...

Product DescriptionThe OATEY PP855-90 is a dishwasher drain hose designed to route wastewater from a dishwasher to a drain connection under the sink or at the disposal. The kit includes an adapter for a secure, leak-resistant connection to standard drain fittings. At 6 feet...

Product Description The OATEY PP855-92 is a steam dryer installation kit designed to simplify the water supply connection during a steam dryer rough-in or replacement. The kit includes a Y adapter and a 6-foot inlet supply line, giving plumbers and installers the core components...

Product Description The OATEY PP855-93 is a red dishwasher supply line designed for residential kitchen plumbing installations. It connects the hot water shut-off valve to the dishwasher inlet using 3/8 inch compression fittings on both ends. The 60 inch length provides enough reach for...

Product Description The OATEY PP8551 is a PTFE thread seal tape designed to create leak-free threaded connections in plumbing, gas, and mechanical piping systems. The tape measures 0.5 inches wide by 60 inches long and is applied to male pipe threads before assembly to...

Product Description The OATEY PP85510 is a die-cast brass slip nut with washer, used to create a secure, leak-resistant connection in drain and waste plumbing assemblies. Sized at 1.5 inches by 1.25 inches, it provides a reliable mechanical joint between drain tailpieces, P-traps, and...

Product Description The OATEY PP855100 is a PTFE thread seal tape designed to create leak-free connections on threaded pipe fittings. Commonly called Teflon tape in the trade, this single-roll package measures 1/2 inch wide by 300 inches long, providing enough material for multiple connections...

Product Description The OATEY PP85511 is a die-cast brass slip nut with washer, designed for use in drain line connections at 1.5 inches by 1.5 inches nominal sizing. This fitting creates a removable, leak-resistant joint between drain components such as P-traps, tailpieces, and drain...

Product Description The OATEY PP85514 is a general-purpose home plumbing repair kit containing an assortment of washers, o-rings, gaskets, and screws sized for the most common residential plumbing service calls. The kit is packaged on a single card and covers four typical repair points:...

Product Description The Oatey PP85515 is a beveled tailpiece polywasher designed for 1-1/2 inch connections used in plastic drainage systems and kitchen and bath fixtures. It is molded from polyethylene and fits 1-1/2 inch inlet and outlet connections, with overall dimensions of 1/2 inch...

Product DescriptionThe OATEY PP85516 is a rubber slip joint washer sized for 1-1/4-inch drain connections. Slip joint washers create a watertight seal at threaded or slip-fit drain line connections, preventing leaks at P-traps, sink tailpieces, and drain extensions. This washer is made from rubber...

Product Description The OATEY PP85517 is a rubber slip joint washer sized for 1.5-inch drain connections. It creates a watertight seal at slip joint fittings commonly found in sink drain assemblies, P-traps, and waste arm connections. The washer compresses between mating slip joint nuts...

Product Description The OATEY PP85519 is a plastic polywasher designed for use in drain and waste plumbing connections. Measuring 1.5 inches by 1.5 inches, this washer creates a reliable seal at slip-joint and drain fitting connections. Each card includes 2 washers, making it a...

Product Description The OATEY PP8552-2LF is a lead-free saddle valve designed for quick, low-pressure tap connections on existing copper tubing or iron pipe. It features a 1/4 inch O.D. tube outlet and is compatible with main line tubing or pipe ranging from 3/8 inch...

Product Description The OATEY PP85521 is a multi-purpose polyethylene tubing supplied in a 25-foot coil at 1/4-inch diameter. Poly tubing in this size is widely used across plumbing, HVAC, and refrigeration applications where a lightweight, flexible, and corrosion-resistant line is needed to transport water,...

Product Description The OATEY PP85526 is a brass insert fitting designed for use with plastic tubing at 3/8 inch outer diameter. Insert fittings of this type seat inside the tube end to maintain bore shape and prevent the tubing wall from collapsing when a...

Product Description The OATEY PP8553 is a strip of abrasive cloth designed for surface preparation of pipe and fittings before soldering, cementing, or joining. At 1.5 inches wide and 36 inches long, it provides enough material to clean and scuff copper, brass, or metal...

Product Description The OATEY PP85535 is a polywasher designed for use in drain fitting assemblies where a reliable, watertight seal is required at slip-joint connections. Sold in a 2-pack, each washer measures 1-1/4 inches by 1-1/4 inches and is constructed from a polymer material...