southland

Product DescriptionThe B K Mueller Industries 511-200HC is a galvanized coupling with an integrated stop, designed for use in threaded pipe assemblies. The stop shoulder prevents over-insertion, keeping pipe ends positioned correctly within the fitting and simplifying alignment during assembly. At 1/8 inches, this...

Product DescriptionThe B K Mueller Industries 521-983HN is a black hex bushing designed to reduce pipe thread size from a 2-inch female thread to a 1/2-inch male thread. This type of fitting is a standard component in threaded pipe systems used for gas, air,...

Product DescriptionThe B K/Mueller Industries 107-637HC is a 1-1/2 inch white PVC Schedule 40 solvent ball valve designed for plumbing and water distribution systems where reliable shutoff and chemical resistance are required. Rated for 150 psi at 73 degrees F, this valve is built...

Product DescriptionThe B K/Mueller Industries 510-000HC is a 1/8 inch galvanized 90 degree elbow fitting used to redirect threaded pipe runs at a right angle. The galvanized finish provides corrosion resistance for use in low-pressure gas, air, or water distribution systems. This fitting accepts...

Product Description The B K/Mueller Industries 510-202HC is a 3/8-inch galvanized steel 45-degree equal elbow designed for low-pressure pipe systems in plumbing and mechanical applications. This fitting changes flow direction at a 45-degree angle while maintaining consistent pipe diameter through the turn. The galvanized...

Product Description The B K/Mueller Industries 510-306HN is a 1-1/4 inch galvanized steel street elbow with a 90-degree turn, used in threaded pipe systems to change flow direction without requiring a separate coupling. One end is male-threaded (street) and the other is female-threaded, allowing...

Product Description The B K/MUELLER INDS(IMPORT) 511-310HC is a galvanized reducing coupling used to connect pipe sections of two different sizes in threaded piping systems. It provides a secure, corrosion-resistant joint between a 1/4-inch pipe and a 1/8-inch pipe. The galvanized finish adds a...

Product DescriptionThe B K/MUELLER INDS(IMPORT) 511-320HC is a galvanized reducing coupling designed for threaded pipe connections where a 3/8-inch line transitions to a 1/8-inch line. The galvanized finish provides corrosion resistance suitable for water supply, gas distribution, and general plumbing applications. This fitting is...

Product Description The B K/MUELLER INDS(IMPORT) 511-406HN is a 1-1/4 inch galvanized pipe cap used to terminate the end of a threaded pipe run. The cap threads onto male-threaded pipe to seal the line and prevent debris ingress, fluid leakage, or pressure loss. It...

Product Description The B K/Mueller Inds 520-306HN is a 1-1/4 inch black malleable iron street elbow designed to change pipe direction 90 degrees in threaded gas, air, and low-pressure piping systems. Street elbows thread directly into a fitting on one end and accept a...

Product Description The B K/Mueller Industries 520-434HN is a black double reducing tee designed for threaded pipe assemblies in gas distribution and similar piping systems. This fitting transitions from a 3/4-inch run on both ends to a 1/2-inch branch outlet, allowing a single fitting...

Product Description The B K/MUELLER INDS(IMPORT) 521-910HC is a black hex bushing used to reduce a larger threaded pipe opening to a smaller one. Sized at 1/4 inch male NPT to 1/8 inch female NPT, this fitting installs in gas, air, and plumbing distribution...

Product Description The B K/Mueller Industries 560-015HC is a galvanized steel pipe nipple used to connect threaded pipe sections in plumbing, gas, and mechanical piping systems. Measuring 1/8 inch nominal pipe size by 1.5 inches in length, this close-cut nipple delivers a corrosion-resistant joint...

Product DescriptionThe B K/Mueller Industries 564-035HN is a galvanized steel pipe nipple measuring 3/4 inch in diameter by 3-1/2 inches in length. Pipe nipples are short threaded pipe sections used to connect two fittings, valves, or other threaded components in a piping system. This...

Product Description The B K/Mueller Industries 565-035HC is a galvanized steel pipe nipple measuring 1 inch in diameter by 3.5 inches in length. Pipe nipples are short threaded sections used to connect two fittings, valves, or other piping components in a run. This nipple...

Product Description The B K/Mueller Industries 565-045HC is a galvanized steel pipe nipple sized at 1 inch nominal diameter by 4.5 inches in length. Pipe nipples serve as short threaded connectors used to join sections of pipe, fittings, or valves within a piping assembly....

Product Description The B K/Mueller Industries 565-055HC is a galvanized steel pipe nipple designed for threaded pipe assemblies in plumbing, HVAC, and general mechanical systems. Measuring 1 inch in diameter and 5.5 inches in length, this close-cut nipple serves as a reliable connector between...