ORBIT INDUSTRIES

Product Description The ORBIT INDUSTRIES 41125 is a 1-gang square device ring designed for use with 4-inch by 4-inch square electrical boxes. Constructed from galvanized steel, this raised plaster ring provides a 1-1/4-inch rise to extend a standard square box to the finished wall...

Product Description The ORBIT INDUSTRIES LN-150 is a zinc die-cast conduit locknut designed to secure threaded conduits or connectors to electrical junction boxes and enclosures in wet locations. The serrated teeth on the locknut bite into the box or enclosure surface, preventing vibratory loosening...

Product Description The ORBIT INDUSTRIES SNR-3816 is a steel regular spring nut designed for use inside strut channel systems. The spring-loaded design allows the nut to seat firmly against the internal edges of the channel, holding it in position during and after installation. It...

Product Description The ORBIT INDUSTRIES EEL22-200 is a 22.5-degree EMT conduit elbow manufactured from prime EMT conduit steel. It conforms to ANSI C80.3 (UL797) specifications, making it a code-compliant choice for commercial and residential electrical conduit installations. The interior and exterior surfaces are free...

Product Description The ORBIT INDUSTRIES 5502 is a raised industrial cover plate designed for use with 4-11/16 inch square electrical boxes. It provides a duplex receptacle opening and sits raised 1/2 inch above the box face, creating the clearance needed for standard duplex receptacle...

Product DescriptionThe ORBIT INDUSTRIES BMA-4 is a box mount adapter designed to secure electrical boxes to metal stud framing using far side support. It is used in rough-in electrical work where a standard box bracket cannot attach directly to the near side of a...

Product Description The ORBIT INDUSTRIES GS-1032 is a green ground screw designed for grounding applications in electrical panels, enclosures, and junction boxes. Sized at 10-32 x 3/8 inches, this screw features a hex washer head with both slotted and Phillips drive options, giving technicians...

Product Description The ORBIT INDUSTRIES MBG-1 is a single-gang gangable masonry switch box designed for device mounting in concrete block and masonry wall installations. Constructed from 16-gauge sheet steel with a galvanized finish, this box measures 1.875 inches wide by 3.75 inches tall by...

Product Description The ORBIT INDUSTRIES RB-300/200 is a malleable iron reducing bushing designed to transition conduit or pipe fittings from a 3-inch connection down to a 2-inch connection. Reducing bushings of this type are standard components in electrical conduit systems, allowing electricians to adapt...

Product Description The ORBIT INDUSTRIES OF7605-S is a steel EMT compression connector designed to bond electrical metallic tubing conduit to junction boxes and electrical enclosures. The insulated throat protects wire insulation at the point of entry and helps meet code requirements for secure, protected...

Product Description The ORBIT INDUSTRIES GSB-1 is an extra-shallow, 1-gang gangable switch box designed for electrical rough-in work in residential and light commercial construction. Measuring 2 inches deep with a 2-inch by 3-inch face footprint, this box ships with ears only — no built-in...

Product Description The ORBIT INDUSTRIES RC-2 is a 4-inch round electrical box cover finished in gray, designed to close out and protect round outlet or junction boxes in completed installations. The cover features 2.5-inch knockouts to accommodate conduit or connector entries where needed. It...

Product Description The ORBIT INDUSTRIES 42075 is a galvanized steel 2-gang square device ring designed to extend and adapt a standard 4-inch square electrical box to accept a 2-gang device plate. Raised 3/4 inches, this ring provides the clearance needed to bring a device...

Product Description The ORBIT INDUSTRIES GB-1-FB is a gangable single-gang switch box designed for new-work and retrofit electrical installations. It includes an FB bracket mount for secure attachment and features a 9/16 inch setback, making it suitable for standard wall assemblies where precise device...

Product Description The ORBIT INDUSTRIES GB-1-MKO is a gangable switch box designed for single-gang electrical device installations. Built 2.5 inches deep, it provides adequate wiring space for switches, receptacles, and similar devices in standard residential and light commercial rough-in applications. The box features integral...

Product Description The ORBIT INDUSTRIES RW-125/75 is a reducing washer designed to adapt a 1.25-inch knockout opening down to a 0.75-inch conduit entry point. Reducing washers are standard components in electrical panel and junction box work, allowing electricians to use a smaller conduit fitting...

Product Description The ORBIT INDUSTRIES SNR-1213 is a steel regular spring nut designed for use inside strut channel systems. It accepts 1/2 inch-13 threaded rod or bolts and provides a secure, repositionable connection point for mounting or hanging electrical components. The internal spring mechanism...

Product Description The ORBIT INDUSTRIES OF7608 is a steel compression-type connector designed to bond 3-inch trade size EMT conduit to electrical junction boxes or enclosures. It provides a secure mechanical connection that maintains conduit continuity and grounding integrity throughout the raceway system. Licensed electricians...

Product Description The ORBIT INDUSTRIES KO3P-400 is a 3-piece knockout seal designed for use in electrical enclosures, panels, and junction boxes where a 4-inch trade size knockout opening must be closed and sealed. This fitting consists of three components that work together to create...

Product Description The ORBIT INDUSTRIES OF734 is a straight squeeze-type flexible metal conduit connector designed for use in dry locations. It bonds flexible metal conduit to electrical boxes or enclosures, providing a secure mechanical connection that maintains the integrity of the conduit system. Constructed...