HILLMAN

Product DescriptionThe HILLMAN BUILDERS HARDWARE 853006 is a decorative cabinet or door hinge finished in satin bright brass. This hinge is designed for lightweight door and cabinetry applications where a polished, traditional brass aesthetic is required alongside functional pivot performance. At approximately 1-5/16 inches...

Product Description The HILLMAN FASTENERS Y12 is a Yale-compatible key blank sold in a 10-count bag. Key blanks are uncut blanks that a licensed locksmith or qualified technician uses as the starting material for key duplication or origination. This blank is cross-referenced to Ilco...

Product DescriptionThe HILLMAN BUILDERS HARDWARE 320872 is a stainless steel U-bolt sized at 1/4 inch diameter with a 1-3/4 inch length and 1 inch inside width. U-bolts of this type are used to clamp, secure, or mount round pipe, conduit, or rod to a...

Product DescriptionThe HILLMAN FASTENERS 706637 is a T25 star drive bit jar, a bulk-packaged collection of T25 Torx-style driver bits suited for fastening and removal tasks across a range of trade applications. The jar format provides jobsite-ready storage and easy access to multiple bits...

Product Description The HILLMAN FASTENERS 376649 is a zinc alloy wallboard anchor sold in a 100-count box. Wallboard anchors provide a secure fastening point in drywall and similar wallboard surfaces where a stud is not present. These anchors accept a screw to expand behind...

Product Description The HILLMAN FASTENERS B77PH is a GM-compatible key blank sold in a 5-count pack. Key blanks serve as the uncut base for duplicating existing keys and are an essential consumable for locksmiths, automotive service shops, and hardware professionals. This blank is identified...

Product Description The HILLMAN FASTENERS 220217 is a Grade 8 hex cap screw with a yellow zinc finish, sized at 1/2 inch diameter by 1 inch length with National Coarse (NC) threading. Grade 8 fasteners are manufactured to meet high-strength requirements, making them suitable...

Product Description The HILLMAN BUILDERS HARDWARE 320758 is a stainless steel eye bolt with nut, sized at 1/4-20 thread by 2-5/8 inches in length. It is designed for fastening, rigging, and anchoring applications where a looped attachment point is needed. The stainless steel construction...

Product DescriptionThe HILLMAN BUILDERS HARDWARE 851435 is a galvanized safety hasp measuring 4.5 inches in length, designed to secure doors, gates, storage units, and equipment enclosures with a padlock. The galvanized finish provides corrosion resistance for use in outdoor and high-moisture environments. This type...

Product Description The HILLMAN FASTENERS 701328 is a heavy-duty trigger snap with an integrated split key ring, constructed from solid brass. It is designed for secure, quick-connect fastening applications where corrosion resistance and reliable latching are required. The snap measures 2.85 inches wide, 5...

Product DescriptionThe HILLMAN FASTENERS 376505 is a hex-head Power Pro Blue concrete screw designed for anchoring into masonry, concrete, and similar hard substrates. The blue coating provides corrosion resistance suited to typical interior and sheltered exterior applications. At 3/16 inch in diameter and 3-3/4...

Product Description The HILLMAN FASTENERS M5 is a replacement key blank compatible with Master brand locks, sold in a convenient 10-blank pack. This blank is designed for locksmiths, hardware professionals, and facilities maintenance technicians who need a reliable, ready-to-cut key blank for high-volume keying...

Product Description The HILLMAN FASTENERS 42485V4 is a bronze ceramic-coated deck screw engineered for exterior fastening applications in treated lumber and outdoor construction. Sized at #10 x 3-1/2 inches, it is built from hardened steel and carries a bronze ceramic coating rated for approximately...

Product Description The HILLMAN FASTENERS 461278 is a hot-dipped galvanized common nail sold in a 1-pound box. At 1.5 inches in length, this is a 4D-penny nail suited for general framing, sheathing, and rough carpentry tasks. The hot-dip galvanizing process coats the full nail...

Product Description The HILLMAN FASTENERS 839900 is a plastic no-dumping warning sign designed for outdoor posting at job sites, dumpster areas, vacant lots, and commercial properties. Constructed from Hy-Glo plastic, it delivers high-visibility color contrast with black panels and orange lettering, making the message...

Product Description The HILLMAN FASTENERS 42673 is a Phillips-drive deck screw sized 8 x 2-1/2 inches, sold in a 1-pound box. These screws are built for exterior wood decking applications and carry a 10-year performance rating, indicating resistance to corrosion and structural degradation over...

Product Description The HILLMAN FASTENERS 49116 is a structural ledger screw designed for heavy-duty wood-to-wood and wood-to-engineered-lumber connections. At 5/16 inch in diameter and 3-5/8 inches in length, this fastener is sized for load-bearing applications where standard deck or construction screws are not rated...

Product Description The HILLMAN FASTENERS B5 is a Briggs key blank sold in a 10-count bag, designed for use in key duplication and locksmith applications. Cross-referenced as Ilco 1098DB, this blank is intended for cutting to match existing keys used on Briggs-keyed locks commonly...

Product DescriptionThe HILLMAN BUILDERS HARDWARE 851879 is a fiberglass-head screw hook manufactured in stainless steel, designed for secure hanging and fastening applications in demanding environments. At 4.25 inches in length with a 0.25-inch diameter shank, this screw hook provides reliable holding strength where corrosion...

Product DescriptionThe HILLMAN BUILDERS HARDWARE 320911 is a fiberglass square U-bolt designed for secure fastening and support applications in trade and construction environments. With a 3/8-16 thread specification, this U-bolt measures 6 inches in length with a 3.63-inch inside width, making it suited for...