HILLMAN

Product Description The HILLMAN FASTENERS Y78 is a Yale-profile key blank sold in a 10-count bag for professional locksmiths and hardware service technicians. Each blank is an uncut key intended to be duplicated on standard key-cutting equipment to match Yale-compatible lock cylinders. The Y78...

Product Description The HILLMAN BUILDERS HARDWARE 852957 is a zinc-plated upper pivot designed for bifold door installations. This hardware component mounts at the top of a bifold door panel and provides the pivoting action that allows the door to fold and slide smoothly along...

Product DescriptionThe HILLMAN FASTENERS 220092 is a Grade 8 hex cap screw with a 5/16-inch diameter and 3-inch length, finished in yellow zinc for corrosion resistance. Grade 8 fasteners meet high-strength requirements and are commonly used in structural, mechanical, and equipment assembly applications where...

Product Description The HILLMAN FASTENERS 532383 is a 2-ounce box of 17-gauge wire brads measuring 1 inch in length. Wire brads are thin, small-headed fasteners used for light-duty nailing tasks where minimal surface marking is required. These brads are well suited for trim work,...

Product Description The HILLMAN FASTENERS 376506 is a hex-head, blue-coated concrete screw designed for anchoring into masonry substrates including concrete, block, and brick. The 3/16-inch diameter by 4-inch length profile provides solid holding capacity in medium-depth applications. The blue corrosion-resistant coating helps extend service...

Product Description The HILLMAN FASTENERS 48609V4 is a bronze ceramic-coated deck screw designed for exterior fastening applications in treated lumber and outdoor construction. Sized at #9 x 2.25 inches, this screw is built from hardened steel and features a star drive recess that delivers...

Product Description The HILLMAN FASTENERS 280310 is a high tensile washer designed for heavy-duty fastening applications. It provides a wide bearing surface that distributes load across bolted joints, reducing the risk of fastener pull-through or surface damage. High tensile construction means it holds up...

Product Description The HILLMAN FASTENERS 150054 is a Grade 2 steel hex nut with a 3/8 inch-24 fine thread pitch, sold in a 100-count box. Hex nuts in this thread class are standard fasteners used to secure bolts, threaded rod, and machine screws across...

Product Description The HILLMAN FASTENERS B102 is a replacement key blank sold in a 10-count bag, designed for use with select Isuzu and Honda SUV vehicles. Key blanks require cutting by a qualified locksmith or key-cutting machine before use. The B102 cross-references the Ilco...

Product Description The HILLMAN FASTENERS 41813 is a brown panel nail designed for fastening decorative wall paneling to wood framing and furring strips. Built from hardened steel with an annular thread shank, this nail drives flush without requiring countersinking or puttying, leaving a clean...

Product DescriptionThe HILLMAN FASTENERS 376536 is a flat head Power Pro Blue construction screw sized at 1/4 inch diameter by 4 inches in length. This screw is engineered for heavy-duty structural fastening applications where a flush, countersunk finish is required. The blue coating provides...

Product Description The HILLMAN FASTENERS 41430 is a hammer drive anchor designed for fast, tool-light fastening into concrete, block, and masonry substrates. The anchor is driven with a standard hammer, expanding mechanically as the pin is set, which creates a secure hold without the...

Product Description The HILLMAN BUILDERS HARDWARE 851972 is a brass continuous hinge measuring 1-1/16 inches wide by 12 inches in length. Continuous hinges, also called piano hinges, run the full length of a door, lid, or panel to distribute load evenly along the entire...

Product DescriptionThe HILLMAN FASTENERS DC3DC1 is an automotive key blank designed for use as a duplication or replacement blank for a range of vehicle makes including Chrysler, GM, Hyundai, Isuzu, Mitsubishi, and Suzuki. Cross-referenced as EZ No. DC3 and Ilco No. X1221, this blank...

Product DescriptionThe HILLMAN FASTENERS 41886 is a #12 x 1-1/2 inch self-drilling screw sold in a 50-piece pack. Constructed from steel with a zinc plating finish, it features a drill point tip that eliminates the need for a pilot hole in most light-gauge metal...

Product DescriptionThe HILLMAN FASTENERS 841840 is a plastic Posted No Trespassing sign measuring 8 inches by 12 inches. It features a black background with fluorescent orange lettering for high visibility in outdoor and low-light conditions. Designed for property boundary marking, this sign is a...

Product Description The HILLMAN FASTENERS 461363 is a 16d bright common nail sold in a 1 pound box. Common nails are general-purpose fasteners used in structural framing, sheathing, and rough carpentry. The 16d designation indicates a 3.5-inch length with a standard shank diameter suited...

Product DescriptionThe HILLMAN BUILDERS HARDWARE 851420 is a 6-inch galvanized safety hasp designed to secure gates, doors, sheds, and storage enclosures against unauthorized access. The galvanized finish provides corrosion resistance suited to outdoor and high-moisture environments. This type of hardware is typically installed by...

Product Description The HILLMAN FASTENERS Y11 is a Yale-pattern key blank sold in a 10-count bag for professional locksmiths and service technicians requiring consistent, reliable stock. This blank is designed to be cut to match Yale-style keyways, making it a standard replenishment item for...

Product Description The HILLMAN BUILDERS HARDWARE 851418 is a galvanized safety hasp measuring 3.5 inches in length, designed to secure doors, gates, storage units, and enclosures against unauthorized entry. The galvanized steel construction provides corrosion resistance suited to outdoor and high-moisture environments. Safety hasps...