HILLMAN

Product Description The HILLMAN FASTENERS 200207 is a Grade 5 USS hex bolt sold in a 25-count pack, designed for general structural and mechanical fastening applications. With a 7/16-inch diameter and 4-1/2-inch length, this bolt meets USS (Unified Standard Series) dimensional specifications and Grade...

Product DescriptionThe HILLMAN FASTENERS 532600 is a brass trim nail sold in a 1-ounce package, designed for finish and trim fastening applications in residential and light commercial construction. These small-gauge nails are used to secure molding, casing, and other decorative trim elements where a...

Product Description The HILLMAN FASTENERS KK2 is an uncut key blank designed as a direct replacement for Kia vehicle keys. Sold in a bag of 10 blanks, this part is intended for locksmiths, automotive service technicians, and hardware professionals who need reliable blanks for...

Product Description The HILLMAN BUILDERS HARDWARE 853581 is a 3.5-inch concealed door hinge finished in oil rubbed bronze, sold as a 3-piece set. This hinge is designed for interior door installations where a clean, hardware-forward aesthetic is desired without exposed barrel hardware. The oil...

Product Description The HILLMAN FASTENERS 461258 is a bright-finish, ring shank drywall nail sold in a 1-pound box. The ring shank design creates mechanical interlock with the substrate, resisting nail pull-through and pop-back - a common failure point in drywall installations. At 1.375 inches...

Product DescriptionThe HILLMAN FASTENERS 41516 is a self-drilling screw designed for fast, reliable fastening without the need for a pilot hole. The No. 10 thread diameter and 3/4-inch length make this screw a practical choice for light-gauge metal-to-metal or metal-to-substrate connections common in HVAC...

Product Description The HILLMAN FASTENERS 532404 is a 2-ounce box of wire nails measuring 1 inch in length at 17 gauge. These small-diameter wire nails are suited for light fastening tasks in construction, maintenance, and finish work. At 17 gauge, the wire diameter is...

Product DescriptionThe HILLMAN FASTENERS 376532 is a flat head Power Pro Blue concrete screw designed for anchoring into concrete, block, and masonry substrates. This 1/4-inch diameter by 2-1/2-inch length fastener features a blue corrosion-resistant coating that extends service life in demanding installation environments. The...

Product DescriptionThe HILLMAN BUILDERS HARDWARE 854468 is a heavy duty barrel bolt designed to secure doors, gates, and panels with a sliding rod mechanism. The bolt slides into a keeper to hold a door or gate in the closed position without a key or...

Product Description The HILLMAN FASTENERS Y157 is a Chrysler-style key blank designed for duplication and replacement applications. Cross-referenced as Ilco P1794, this blank is compatible with select 1994 Chrysler vehicles and is sold in a bag of 10 blanks. The Y157 is a standard...

Product Description The HILLMAN FASTENERS 461463 is a galvanized roof nail designed for securing roofing materials in residential and light commercial applications. At 2 inches in length and 11 gauge in diameter, this nail provides the holding strength and corrosion resistance required for exposed...

Product Description The HILLMAN BUILDERS HARDWARE 853081 is a fiberglass corner brace measuring 6 inches in length and 1.125 inches in width, finished in a matte gray vinyl coating. This structural support brace is designed to reinforce inside and outside corners on door frames,...

Product Description The HILLMAN BUILDERS HARDWARE 852246 is a galvanized barrel bolt designed for sliding-bolt latch applications on doors, gates, and enclosures. The bolt slides horizontally into a strike receiver to secure a door or panel in the closed position without requiring a key...

Product Description The HILLMAN BUILDERS HARDWARE 852805 is a full mortise door hinge finished in satin brass, designed for residential and light commercial door installations. This 4-inch hinge features a 5/8-inch radius corner profile, making it a standard fit for pre-bored door frames and...

Product DescriptionThe HILLMAN FASTENERS 372217 is a Screw-Bolt Plus concrete anchor designed for direct fastening into concrete, block, and masonry without the need for a separate anchor insert. Each anchor measures 1/4 inch in diameter and 3 inches in length, providing a solid mechanical...

Product Description The HILLMAN BUILDERS HARDWARE 854476 is a 2-inch barrel bolt finished in black, designed to provide simple and reliable sliding-latch security for doors, gates, cabinets, and similar applications. Barrel bolts operate by sliding a cylindrical rod into a strike loop or receiver,...

Product DescriptionThe HILLMAN FASTENERS 41887 is a 1/4-inch by 3/4-inch self-drilling screw designed for fast, reliable fastening in metal-to-metal and light structural applications. Constructed from steel with a zinc plating for corrosion resistance, this screw features a drill-point tip that eliminates the need for...

Product DescriptionThe HILLMAN FASTENERS 532467 is a black furniture nail sold in a 25-count package. These decorative cut nails are used to fasten upholstery, trim, and fabric to wood furniture frames. The black finish provides a clean, finished appearance in applications where the nail...

Product DescriptionThe HILLMAN FASTENERS 461354 is a 4D common nail with a bright finish, sold in a 1-pound box. Common nails are general-purpose wire nails used in wood framing, sheathing, and rough carpentry. The bright finish indicates no coating or treatment, making these nails...

Product DescriptionThe HILLMAN BUILDERS HARDWARE 852260 is a satin nickel handrail bracket designed to mount and support stair handrails to walls or posts. This bracket provides a secure anchor point that keeps handrails stable under load, making it a standard component in residential stair...