HALEX

Product Description The HALEX/SCOTT FETZER 12312 is a 1-1/4 inch set screw type connector designed to secure and terminate electrical metallic tubing (EMT) to a knockout opening in a concrete tight box or dry location. Constructed from die cast zinc, this connector provides a...

Product Description The HALEX SCOTT FETZER 7310 is a 1-inch watertight cable connector designed to seal and terminate oval Type SE or Type SEU service entrance cable at a threaded entry of a watertight enclosure. Built for service entrance applications, this connector provides a...

Product Description The HALEX/SCOTT FETZER 94107 is a 3/4 inch corner pull elbow designed for use with threaded rigid conduit and IMC (Intermediate Metal Conduit) systems. It facilitates pulling conductors through a shared bend in a conduit run, eliminating the need to work wire...

Product DescriptionThe HALEX/SCOTT FETZER 58805 is a Type T threaded oval conduit body designed for 1/2 inch rigid metal conduit (RMC) and intermediate metal conduit (IMC) installations. It ships with a cover and gasket pre-assembled, allowing electricians to complete the installation without sourcing additional...

Product DescriptionThe HALEX/SCOTT FETZER 64415 is a 1-1/2 inch EMT 90 degree elbow designed to change the direction of an electrical metallic tubing conduit run by 90 degrees. Constructed from galvanized steel, this fitting provides corrosion resistance in standard indoor and outdoor electrical installations....

Product Description The HALEX/SCOTT FETZER 58905 is a 1/2 inch threaded oval conduit body, Type LR configuration, designed for use in rigid metal conduit and IMC raceway systems. Constructed from copper-free die cast aluminum, it ships with a cover and gasket assembled. Electricians install...

Product Description The HALEX/SCOTT FETZER 64412 is a 1-1/4 inch EMT 90 degree elbow used to make a right-angle direction change in a run of Electrical Metallic Tubing conduit. Constructed from galvanized steel, this fitting provides corrosion resistance in typical commercial and residential wiring...

Product Description The HALEX/SCOTT FETZER 20517 is a non-metallic snaptite connector designed to secure non-metallic sheathed cable to a steel outlet box or other metal enclosure. Each connector features a snap-in design that eliminates the need for a locknut, reducing installation time on the...

Product Description The HALEX/SCOTT FETZER 67870 is a 3-inch conduit pipe hanger with bolt, designed to secure a length of rigid or EMT conduit from an overhead support. Constructed from steel with a zinc plating for corrosion resistance, this hanger is built for long-term...

Product Description The HALEX/SCOTT FETZER 58012 is a 1-1/4 inch aluminum service entrance cap designed for clamp-type installation on rigid, intermediate, or thin-wall conduit. This fitting seals the top of a service entrance conduit run, protecting the conductors from moisture and weather intrusion at...

Product Description The HALEX/SCOTT FETZER 12415 is a 1-1/2 inch EMT set screw coupling used to join lengths of electrical metallic tubing in conduit installations. Made from die cast zinc, this concrete tight coupling holds two EMT sections together with a set screw fastening...

Product Description The HALEX/SCOTT FETZER 90452 is a 3/4 inch screw-in coupling designed for connecting armored cable (AC) and flexible metal conduit (FMC) in electrical installations. Cast from die-cast zinc, this coupling provides a secure, metal-to-metal connection at conduit termination points. It is sold...

Product Description The HALEX/SCOTT FETZER 91695 is a 1/2 inch, 90-degree multi-piece liquid tight connector designed to terminate and seal liquid tight flexible metal conduit to oil tight, liquid tight, or rain tight boxes and enclosures. Constructed from die cast zinc, this connector provides...

Product DescriptionThe HALEX/SCOTT FETZER 90702 is a 3/4 inch chase conduit nipple sold in a 20-piece polybag pack. Chase nipples are short threaded fittings used to connect conduit sections or secure conduit entry points through enclosure knockouts, junction boxes, and panel walls. This fitting...

Product Description The HALEX/SCOTT FETZER 90440 is a 3/8 inch screw-in connector designed for terminating armored cable (AC) and flexible metallic conduit (FMC) into a 1/2 inch knockout. Constructed from die cast zinc, this connector provides a secure mechanical connection between flexible raceway or...

Product Description The HALEX/SCOTT FETZER 96113 is a 1-inch, 1-hole steel conduit strap designed for securing rigid metal conduit and IMC conduit to framing, joists, and structural surfaces. Constructed from zinc-plated steel, it resists corrosion in typical indoor electrical installations. The snap-on design allows...

Product Description The HALEX/SCOTT FETZER 96073 is a steel snap-in knockout seal blank designed to close unused knockout openings in electrical enclosures, junction boxes, panel boxes, and conduit fittings. Each package contains two blanks sized for 1-inch knockouts. The snap-in design allows the blank...

Product Description The HALEX 61507B is a one hole strap designed to secure 3/4-inch EMT conduit to walls, ceilings, joists, and other structural surfaces. These straps provide a low-profile, rigid mount point that keeps conduit runs aligned and code-compliant in both new construction and...

Product Description The HALEX/SCOTT FETZER 96831 is a zinc plated steel reducing washer sold in a 2-pack configuration. It steps down a 1-inch knockout or opening to accept a 1/2-inch conduit fitting, allowing electricians to reuse oversized knockouts without cutting new holes or replacing...