AIR FLOW PRODUCTS

Product DescriptionThe AIR FLOW PRODUCTS 5240805 is a straight ceiling diffuser boot designed to connect ductwork to a ceiling diffuser in residential and light commercial HVAC systems. This boot provides a direct, straight-through airflow path from the supply duct to the diffuser face, with...

Product DescriptionThe AIR FLOW PRODUCTS 7741206 is a straight register boot designed to connect duct runs to floor, wall, or ceiling registers in residential and light commercial HVAC systems. This boot features a 4x12 inch opening and a 6 inch round collar, providing a...

Product DescriptionThe AIR FLOW PRODUCTS EC07 is a tee end cap designed to close off the open end of a tee fitting in a duct or piping distribution system. Sized at 7 inches, this end cap provides a clean, secure termination point that prevents...

Product DescriptionThe AIR FLOW PRODUCTS 7241206 is a center end register boot designed to transition ductwork to a floor, wall, or ceiling register opening. This 90-degree boot connects a round or rectangular duct run to a register face at a right angle, directing conditioned...

Product Description The AIR FLOW PRODUCTS 84ATD07 is an airtight stick-on takeoff with an integrated damper, designed for use with flat duct systems. This fitting creates a branch connection directly off a flat duct surface without requiring sheet metal cutting tools for the primary...

Product Description The AIR FLOW PRODUCTS 7741005 is a straight register boot designed to connect round duct to a rectangular floor, wall, or ceiling register opening. The boot features a 4x10 inch face opening and a 5 inch round collar for duct attachment. This...

Product Description The AIR FLOW PRODUCTS 77121614 is a straight transition boot with flange, designed to convert a rectangular duct opening to a round collar in HVAC sheet metal ductwork systems. This fitting transitions from a 12-inch by 16-inch square or rectangular duct face...

Product Description The AIR FLOW PRODUCTS 84ATD-2-12 is an airtight stick-on takeoff with an integrated damper designed for use with flat duct systems. This fitting allows HVAC technicians to branch supply air from a flat duct run without cutting into the main trunk —...

Product Description The AIR FLOW PRODUCTS 31SLOCKE is a 60-inch S-cleat designed for joining sections of rectangular sheet metal duct. S-cleats are a standard mechanical fastener in low-pressure duct assembly, sliding over the folded edges of two adjoining duct sections to form a secure,...

Product Description The AIR FLOW PRODUCTS RE086 is a duct reducer-increaser fitting designed to transition between 8-inch and 6-inch round duct sections in forced-air HVAC systems. This type of fitting is used to step down airflow from a larger trunk or branch to a...

Product Description The AIR FLOW PRODUCTS 84ATD08 is an airtight stick-on takeoff with an integrated damper designed for flat duct systems. This fitting creates a branch connection directly off a flat duct surface, with a built-in damper that allows airflow to be balanced or...

Product Description The AIR FLOW PRODUCTS 84DB1512 is a duct board tab takeoff fitting designed for branch connections in fiberglass duct board HVAC systems. This fitting provides a secure, tab-locking attachment point where a branch duct or collar connects to a main duct board...

Product DescriptionThe AIR FLOW PRODUCTS 7341408 is a 90-degree register boot designed to transition ductwork from a horizontal run to a vertical floor or wall register opening. This sheet metal fitting connects the supply duct to the register face, directing conditioned air into the...

Product DescriptionThe AIR FLOW PRODUCTS 5341005 is a ceiling diffuser boot with rail designed for residential and light commercial HVAC duct distribution systems. This boot transitions from round duct to a rectangular diffuser opening, directing conditioned air into the occupied space through a ceiling-mounted...

Product DescriptionThe AIR FLOW PRODUCTS 84ATD-2-06 is an airtight stick-on takeoff fitting with an integrated damper, designed for use with flat duct systems. This fitting attaches directly to flat duct without cutting or welding, creating a sealed branch connection that controls airflow through the...

Product Description The AIR FLOW PRODUCTS 840-1-ATD200-000007 is an airtight stick-on takeoff fitting with an integrated damper, designed for use with flat duct systems. It features a 7-inch collar and a 2-inch standoff profile, making it suitable for low-clearance installations where standard takeoff fittings...

Product Description The AIR FLOW PRODUCTS 86F4 is a full flow tee fitting designed for duct and piping systems where maintaining maximum airflow through all three ports is critical. Unlike standard tee fittings that restrict flow at the branch, the full flow design allows...

Product Description The AIR FLOW PRODUCTS 840-1-ATD200-000008 is an airtight stick-on takeoff fitting with an integrated damper, designed for use with flat duct systems. It measures 8 inches in diameter with a 2-inch standoff, allowing the fitting to clear insulation or other obstructions on...

Product Description The AIR FLOW PRODUCTS 840-1-RATD20-000005 is an airtight stick-on takeoff designed for round duct pipe and fitted with an integral damper. It attaches directly to the surface of a round main trunk or branch duct, providing a sealed branch outlet without the...

Product Description The AIR FLOW PRODUCTS PI145SL is a snap-lock galvanized steel pipe section used in residential and light commercial HVAC duct systems. Fabricated from 28-gauge galvanized steel, this straight pipe section measures 14 inches in diameter and 5 feet in length. The snap-lock...