Kreg Tool Company SPS-F1-100 Pocket Hole Screws 100ct

Product Description

The KREG TOOL COMPANY SPS-F1-100 is a 100-count box of Number 7 by 1 inch fine-thread pan head pocket hole screws engineered for use in hardwood applications. Built from case hardened steel, these screws are designed to deliver strong, reliable joints in dense wood species where a fine thread pitch provides superior holding power compared to coarse-thread alternatives. The pan head profile seats flush in pocket hole bores, keeping the joint face clean. These screws are intended for interior woodworking projects where moisture exposure is not a primary concern.

These pocket hole screws are best suited for hardwood joinery in furniture making, cabinetry, and trim carpentry. Recommended wood species include ash, maple, hickory, mahogany, oak, walnut, cherry, and birch. The fine thread is specifically matched to the denser grain structure of hardwoods, reducing the risk of strip-out during drive. They are appropriate for residential and light commercial interior installations where a consistent, production-ready fastener is required on a regular basis.

Key Features

• Number 7 by 1 inch size matched to standard pocket hole jig settings for hardwood stock
• Fine thread pitch engineered for dense hardwood species to maximize pull-out resistance
• Pan head profile seats cleanly in pocket hole bores without protrusion
• Case hardened steel construction resists shear forces during tightening
• Rated for indoor exposure where moisture is not a significant concern
• 100-count packaging suits both single-project and moderate production use

Compatibility

Designed for use with pocket hole jig systems when joining hardwoods including ash, maple, hickory, mahogany, oak, walnut, cherry, and birch. Recommended for a wide variety of indoor applications where moisture is not a significant concern.

Installation Notes

Pocket hole screws are driven by finish carpenters, cabinet makers, and woodworkers using a dedicated pocket hole jig and a square-drive or Torx bit driver. Always drill the pocket bore with the jig set to the correct stock thickness before driving fasteners. Use a drill or impact driver set to a controlled clutch setting to avoid overdriving and stripping the pocket. These screws are not rated for exterior or high-moisture environments and should not be substituted for exterior-rated fasteners.