Kreg Tool Company P-OAK Oak Pocket Hole Plugs 3/8in 50pk

Product Description

The KREG TOOL COMPANY P-OAK is a 50-pack of solid-oak wood plugs designed to conceal or decoratively accent pocket holes created with a Kreg pocket hole jig system. Each plug is 3/8 inches in diameter and is cut at an optimum angle that allows it to seat flush with the workpiece surface, minimizing the need for additional sanding after installation. The solid-oak construction provides a natural wood appearance that can be stained or finished to match the surrounding material. These plugs are appropriate for woodworking and finish carpentry applications where a clean, professional pocket hole concealment is required.

These oak plugs are suited for use in residential and light commercial woodworking projects, including cabinet assembly, furniture building, and trim carpentry. They are compatible with materials ranging from 1/2 inch to 1-1/2 inches thick. The plugs are intended for use wherever pocket hole joinery is employed and a concealed or accented finish is desired. Installers typically tap the plug into the pocket hole opening and trim or sand flush as needed for a finished surface appearance.

Key Features

• Solid-oak construction for a natural wood appearance that accepts stain and finish
• 3/8 inches round diameter for a snug, seamless fit in standard pocket holes
• Optimum cut angle promotes a flush seat with minimal sanding required
• Compatible with material thicknesses from 1/2 inch to 1-1/2 inches
• Can be used to conceal pocket holes or serve as a decorative accent
• 50 plugs included per pack

Compatibility

Designed for use with standard 3/8 inches pocket holes in materials from 1/2 inch to 1-1/2 inches thick, consistent with common Kreg pocket hole jig applications.

Installation Notes

Pocket hole plugs are typically installed by finish carpenters or woodworkers during the final stages of assembly. Apply a small amount of wood glue to the plug before seating it into the pocket hole opening. Tap the plug gently into place with a mallet and allow the adhesive to cure fully before trimming or sanding flush. No power tools are required for basic installation, though a flush-cut saw or chisel may be used to remove any proud material.