Abb UA9FLB Schedule 40 Pvc 90 Degree Elbow 3x36 Inch

Product Description

The ABB INSTALLATION PRODUCTS UA9FLB is a Schedule 40 PVC 90-degree elbow with a special radius and belled end, designed for conduit routing applications where a standard-radius sweep is not sufficient. Measuring 3 inches in diameter by 36 inches in length, this elbow provides a long, sweeping bend that reduces wire and cable pulling tension during installation. The belled end allows direct connection to standard Schedule 40 conduit without additional couplings. At 7.3 pounds, the fitting is robust enough for both above-ground and in-slab applications. Electricians and conduit installers working on larger commercial or industrial raceways will find this elbow suited for high-fill or high-tension wire pulls.

This fitting is used in electrical conduit systems where a long-radius 90-degree change in direction is required. The special radius design is particularly useful in runs carrying multiple conductors or large-gauge wire, where tight bends would exceed NEC bend radius requirements. Typical applications include underground feeder runs, concrete encasement, exposed industrial conduit systems, and service entrance raceways. It is sold as an individual unit and is intended for use with 3-inch Schedule 40 PVC conduit systems.

Key Features

• 3-inch diameter by 36-inch body length provides a long, low-tension sweep for large wire pulls
• Schedule 40 PVC construction rated for standard conduit system pressure and impact requirements
• Special radius bend reduces conductor insulation stress during pull-through
• Belled end allows direct coupling to Schedule 40 PVC conduit without a separate coupling fitting
• Suitable for above-ground, direct burial, and concrete-encased conduit applications

Compatibility

Designed as an OEM-style fitting for use with 3-inch Schedule 40 PVC electrical conduit systems.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC requirements for conduit bends and fill ratios. Shut off all power to any energized circuits before working in the conduit run. Use approved PVC conduit cement and primer on all solvent-weld joints; do not substitute adhesives not rated for PVC conduit. Support the conduit and fitting at intervals required by the applicable electrical code.

Technical Specifications

• Diameter: 3 inches
• Length: 36 inches
• Bend Angle: 90 degrees
• Radius Type: Special Radius
• Schedule: Schedule 40
• Material: PVC
• End Type: Belled End
• Weight: 7.3 pounds
• Package Quantity: 1

Standard Information

• Brand: ABB INSTALLATION PRODUCTS
• Manufacturer Part Number: UA9FLB