lowell

Product DescriptionThe LOWELL 10015LVC-DW is a 70-volt, 100-watt Decora-style volume control designed for distributed audio systems in commercial and institutional settings. It mounts in a standard single-gang wallbox and provides local level adjustment for 70V speaker circuits without requiring a separate transformer tap change...

Product Description The LOWELL 10015LVC-SW is a 70-volt attenuator and volume control designed for distributed audio systems. Rated at 100 watts, it provides level adjustment in 1.5 dB steps, giving installers precise control over speaker zone output without introducing significant signal degradation. The single-gang...

Product Description The LOWELL 100LVC-DB is a single-gang in-wall volume control attenuator rated for 100 watts on 70V and 25V distributed audio systems. It provides local level adjustment at the listening zone without affecting other zones on the same line. The unit mounts in...

Product Description The LOWELL 100LVC-RM is a 100-watt audio attenuator designed for 70-volt and 25-volt distributed audio systems. It allows installers to reduce signal level to individual loudspeakers or zones without interrupting the overall line. The unit is rack-mountable, making it well suited for...

Product Description The LOWELL 10KLVC-DB is a 10k ohm potentiometer volume control designed for 70-volt distributed audio systems. It provides local level adjustment at a speaker zone, allowing installers to set independent volume at each tap point without affecting the rest of the distribution...

Product Description The LOWELL 200LVC-RM is a 200-watt rackmount volume control designed for professional audio distribution and installed sound systems. It provides level control in a standard rack-mount form factor, allowing installers to manage audio output within centralized equipment racks. The unit is rated...

Product Description The LOWELL 25LVC-DB is a 25-watt audio attenuator designed for use in 70-volt and 25-volt distributed audio systems. It provides local volume control at the speaker tap point, allowing installers to adjust output levels without affecting the rest of the signal loop....

Product Description The LOWELL 50LVC-DB is a 50-watt attenuator designed for 70-volt and 25-volt distributed audio systems. It provides local volume control at a speaker tap point, allowing a zone or individual speaker to be adjusted without affecting the rest of the distribution loop....

Product Description The LOWELL ACR-1509-S is a rackmount AC power panel rated at 15 amps with integrated surge suppression. Designed for professional AV, broadcast, and low-voltage systems installations, it provides filtered and protected AC distribution from a standard rack enclosure. The surge suppression circuitry...

Product DescriptionThe LOWELL BC81072 is a beam clamp speaker assembly designed for suspended structural mounting applications in commercial and institutional environments. The unit combines a beam clamp mounting mechanism with speaker hardware into a single integrated assembly, allowing installers to attach speaker systems directly...

Product Description The LOWELL CS650-DW is a rackmount attenuator and program select unit designed for use in commercial audio distribution systems. It provides level control and source selection in a single panel-mounted device, allowing installers to manage audio signal routing and volume adjustment at...

Product Description The LOWELL D8P-ID-3 is a 3U rack-mount panel designed to accept and organize Decora-style devices within a standard equipment rack. It provides a clean, professional mounting solution for up to 8 Decora inserts in a single rack unit grouping, keeping low-voltage control...

Product DescriptionThe LOWELL FS18-20 is a flat-ship wall shelf designed for mounting equipment in rack and AV installation environments. Measuring 18 inches wide by 20 inches deep, this shelf provides a sturdy horizontal surface for supporting components where a traditional rack enclosure is not...

Product Description The LOWELL IM12Q-TS100-3SW is a complete iMount 12-inch speaker package designed for professional audio distribution and commercial sound system installations. This package bundles the components needed for a finished ceiling or wall speaker assembly, making it a practical solution for contractors and...

Product Description The LOWELL LER-2422 is a freestanding enclosed equipment rack designed for structured wiring, AV distribution, and low-voltage system installations. At 24U of usable rack space and 22 inches of interior depth, this enclosure provides organized, secure housing for amplifiers, patch panels, signal...

Product DescriptionThe LOWELL LER-4022 is a 40U enclosed rack designed for organized, secure mounting of audio-visual, network, and low-voltage equipment in commercial and institutional installations. Standing at 40 rack units tall with a 22-inch depth, this enclosure provides substantial capacity for dense equipment loadouts....

Product Description The LOWELL LMSB-22 is a shallow mobile base designed to support rack-mounted enclosures and equipment cabinets. It provides a stable, rolling foundation that allows technicians to reposition rack systems without disassembly. Built for use in professional AV, data, and low-voltage installations, this...

Product Description The LOWELL LUH-VRG is a cast aluminum grille designed as a protective and finished cover for the LUH series speaker. Built from cast aluminum, this grille provides durable coverage over the speaker face while maintaining acoustic transparency. It is a direct companion...

Product Description The LOWELL LV-50S is a single-gang potentiometer designed for 70-volt distributed audio systems. It provides manual volume control at the listener location, allowing installers to adjust audio output levels independently from the source amplifier. Commonly used in commercial and institutional audio applications,...