INOVONICS

Product Description The Inovonics ACC523-25 is a pack of 25 replacement base housings for Inovonics EN1235SF and EN1235DF transmitters. These wireless transmitter bases provide indoor mounting support for fixed holdup pendants, helping secure installation and restore appearance in high-contact environments such as banking and...

Product Description The INOVONICS ACC610 is an AC-to-AC transformer adapter designed to step down 120 VAC input to a 12 VAC output for use with compatible INOVONICS wireless security and life-safety devices. This type of adapter provides a stable low-voltage AC supply required by...

Product Description The INOVONICS ACC623A is an accessory pack designed for use with the EN1223 pendant transmitter. It supplies replacement or supplemental components that support the continued operation of the EN1223 in wireless monitoring and alert systems. This pack is intended for installation and...

Product Description The INOVONICS ACC625-50 is a pack of 50 reset button seals designed for use with the E-1223s wireless transmitter. These seals cover and protect the reset button on the device, providing a tamper-evident indication when the button has been accessed. The seals...

Product Description The INOVONICS ACC650 is an outdoor housing enclosure designed to protect compatible wireless repeater units installed in exterior environments. This enclosure shields repeater hardware from moisture, dust, and environmental exposure, extending the service life of wireless network infrastructure. It is a hardware...

Product Description The INOVONICS BAT609 is a 3-volt CR2450N lithium coin cell battery designed for use in low-power electronic devices and wireless sensing equipment. Sold individually, this single-cell unit delivers stable voltage output and long shelf life typical of lithium chemistry batteries. It is...

Product DescriptionThe INOVONICS BAT610 is a 3.0-volt lithium battery rated at 2.2 ampere-hours (Ah), designed for high-traffic wireless sensing and monitoring applications. This single-cell lithium primary battery delivers stable long-term voltage output, making it well-suited for devices that cycle frequently or operate in demanding...

Product Description The INOVONICS BAT850 is a lithium battery assembly designed as a direct replacement power source for compatible wireless devices in commercial and industrial security and life-safety systems. This assembly provides the sustained, reliable power output required to maintain device operation between service...

Product DescriptionThe INOVONICS BAT851 is a replacement battery designed for use with Inovonics wireless repeater units. Repeaters extend the range of wireless signal networks in commercial and residential installations, and maintaining battery backup integrity is essential to system reliability. This battery is a direct...

Product DescriptionThe INOVONICS EN1210 is a single-zone wireless transmitter designed for door and window contact monitoring in security and access control systems. Built for licensed low-voltage security technicians, this transmitter sends a wireless signal to a compatible receiver whenever the monitored zone changes state....

Product DescriptionThe INOVONICS EN1210EOL is a universal transmitter end-of-line resistor designed for use in wireless door and window contact applications. This component integrates directly into a transmitter circuit to provide supervised loop monitoring, allowing the system to detect open, closed, and tamper conditions on...

Product DescriptionThe INOVONICS EN1210W is a single-zone wireless transmitter designed for door and window contact applications in security and life-safety systems. The unit includes an integrated magnetic tamper feature, which triggers an alert if the device is physically disturbed or removed from its mounting...

Product Description The INOVONICS EN1212 is a wireless dual universal input transmitter designed to interface two hardwired contact or analog input devices with an Inovonics wireless network. It converts signals from dry-contact sensors, loop detectors, or other input devices into wireless transmissions for reception...

Product DescriptionThe INOVONICS EN1215EOL is a wireless door and window transmitter featuring an integrated wall tamper switch. Designed for use in commercial and residential security systems, this contact transmitter monitors the open and closed status of doors and windows and sends a wireless signal...

Product DescriptionThe INOVONICS EN1215WEOL is a wireless door and window transmitter designed for perimeter intrusion detection in security systems. It monitors the open and closed status of doors and windows and transmits status changes to a compatible wireless receiver or control panel. The unit...

Product DescriptionThe INOVONICS EN1223D is a two-button waterproof pendant transmitter designed for wireless personal emergency and panic signaling applications. Built for wearable use, this pendant allows a user to trigger an alarm signal from two independent buttons, sending a wireless transmission to a compatible...

Product DescriptionThe INOVONICS EN1223S is a single-button waterproof pendant transmitter designed for wireless panic and emergency signaling applications. Built for wearable, on-person use, it allows the user to send an immediate alert signal to a compatible wireless receiver or control panel with a single...