3M

Product Description3M Heat Shrink Tubing FP-301 is a useful product for various industrial and military applications. This tubing, known by MPN 7100083140, is designed to provide reliable electrical insulation over cable splices and terminations. Flexible polyolefin construction for moisture protection Flame-retardant and suitable for...

Product DescriptionThe 3M 7100083141 is a thin-wall heat shrink tubing from the FP-301 series, designed to provide reliable insulation, strain relief, and environmental protection for electrical wiring and connections. It features a 4-inch diameter and a 48-inch length, making it well suited for larger...

Product Description The 3M 7100083169 is a thin-wall heat shrink tubing sold on a 50-foot spool. Part of the FP-301 series, this tubing delivers a balanced combination of electrical insulation, physical durability, and chemical resistance suited for a wide range of industrial and military...

Product Description The 3M 7100083348 is a specialty high temperature crepe paper masking tape engineered for aerospace decorative painting applications where clean removal and consistent hold are critical. Designated as the 5501A series, this tape is rated to withstand surface temperatures up to 300...

Product Description The 3M 7100083470 is a non-treated high-density polyethylene plastic sheeting roll designed for large-area masking, dust containment, and overspray protection during painting and surface preparation work. The roll measures 6 feet wide by 90 feet long at 0.35 mil thickness and is...

Product DescriptionThe 3M 7100083512 is a unitized nonwoven abrasive wheel engineered for deburring, finishing, and blending in a single tool. Built with 3M Precision-Shaped Ceramic Grain, the wheel cuts fast and sharp, reducing the time needed to remove burrs from metal workpieces. The unitized...

Product Description The 3M 7100083703 is a double coated acrylic tape engineered for high-strength bonding on difficult-to-adhere substrates. Built on the 9474LE platform, it uses a 300LSE quick-stick adhesive that delivers very high initial adhesion to low surface energy (LSE) plastics such as polypropylene,...

Product Description The 3M 7100083776 is an insulated ring tongue terminal designed for secure, permanent electrical connections in wire termination applications. Built with a butted seam construction and full insulation, this terminal accepts 16-14 AWG wire and fits a size 6 stud. The ring...

Product Description The 3M 7100083803 is a Scotch-Brite 645DC unitized surface conditioning wheel designed for the removal and pre-polishing of extra-hard materials. It incorporates diamond mineral abrasive, making it effective on carbide thermal spray coatings, ceramics, and similarly hard substrates. The wheel is capable...

Product Description The 3M 7100083907 is a Scotch-Brite Surface Conditioning Film Backed Belt designed for cleaning, finishing, blending, and deburring applications across metal fabrication and surface prep work. Built on a stretch-resistant nylon film backing, this non-woven belt delivers consistent cutting action throughout its...

Product DescriptionThe 3M 7100083948 is a Trizact 237AA coated abrasive belt designed for intermediate finishing and fine polishing applications. It uses 3M microreplication technology in which micron-graded aluminum oxide particles are formed into three-dimensional pyramids and bonded to an X-weight cloth backing. As the...

Product DescriptionThe 3M Fire Barrier Pass-Through Device Foam Plugs with MPN 7100084021 are designed for closing fire barrier pass-through devices used in wall and floor penetrations. These plugs are essential for creating a seal that helps block sound and smoke. When used during a...

Product Description The 3M 7100084024 is a portable, hand-held filament tape dispenser designed for dispensing filament-reinforced tapes and narrow-width film sealing tapes in widths ranging from 0.5 inches to 1 inch. Built for durability under demanding conditions, the HB901 features a high-impact construction suited...

Product DescriptionThe 3M 7100084069 Paint Masking Tape 231 is designed for reliable performance in various applications. Its natural rubber adhesive allows for quick sticking and enduring hold, resisting lifting and curling. This tape is commonly used in paint masking tasks due to its smooth,...

Product DescriptionThe 3M 7100084230 is a general-purpose pressure-sensitive adhesive nylon loop reclosable fastener supplied in a continuous roll measuring 1 inch wide by 50 yards long. The fastener features a rubber-based adhesive backing rated for general performance bonding and is designed for pairing with...

Product Description The 3M 7100084231 is a general-purpose pressure-sensitive adhesive nylon hook fastener designed for reclosable fastening applications. Sold as SJ3530 Hook S030, this roll measures 1 inch wide and 50 yards long with a profile height of 0.15 inches. The backing is coated...

Product DescriptionThe 3M 7100084335 is a 700 Series unitized abrasive wheel engineered for tough finishing work on hard metals. Built with silicon carbide mineral and a medium-to-hard density non-woven construction, this 6-inch wheel delivers consistent cut and finish even on demanding materials like titanium,...

Product Description The 3M 7100084356 is a double coated tissue carrier tape with an extended liner, designed for high-volume bonding and mounting applications across industrial, commercial, and print-trade environments. The tape features a pressure sensitive rubber adhesive from the Rubber Adhesive 770 family and...

Product Description The 3M 7100084365 is an impact stripping tape engineered for surface protection during plastic media blast paint stripping operations. The tape features an 85.0 mil (2.2 mm) thick tan rubber backing with an acrylic adhesive system and a tan easy-release paper liner....