Zoeller ZOEL-267-0039 Sewage Pump 0.5 Hp 230V Nonautomatic

Product Description

The ZOELLER ZOEL-267-0039 is a nonautomatic sewage pump rated at 0.5 HP and 230 volts, single phase, designed for residential sewage ejector and septic system applications. The pump removes raw sewage and effluent from below-grade collection pits and pump tanks. It ships with a 25-foot power cord and requires a piggyback float switch or a dedicated control panel to establish on and off points in the field. The motor housing and pump housing are cast iron. Identification tag, handle, and hardware are stainless steel. Every unit is factory-submerged and tested against its published performance curve before leaving the facility.

This pump is suited for residential sewage ejector systems where the sump pit or pump tank depth requires field-adjustable switching rather than a fixed integral float. Nonautomatic configuration gives the installer precise control over activation and deactivation levels, making it particularly useful in deep-pit installations or systems with variable influent rates. A licensed plumber or pump contractor typically handles installation in accordance with local plumbing codes.

Key Features

• Nonautomatic operation — pairs with a piggyback float switch or control panel for field-adjustable on/off settings
• Cast iron motor housing and pump housing for durability in harsh sewage environments
• Stainless steel identification tag, handle, and hardware resist corrosion
• Factory performance-curve test on every unit before shipment
• 25-foot power cord included for flexible pit installation depth
• Handles raw sewage and effluent in residential sewage or septic system applications

Compatibility

Designed as an OEM-style replacement or direct-install sewage pump for residential sewage ejector and septic system applications requiring a nonautomatic submersible pump.

Installation Notes

Installation should be performed by a licensed plumber in compliance with applicable local plumbing codes and the International Plumbing Code (IPC). Disconnect power at the circuit breaker and confirm zero voltage at the pump before handling or servicing the unit. Do not operate the pump dry — the pit must contain liquid before energizing. A piggyback float switch or control panel must be wired and set before placing the pump in service; running without a switching device will cause continuous operation and premature motor failure.

Technical Specifications

• Motor Power: 0.5 HP
• Voltage: 230 volts
• Phase: 1-phase
• Cord Length: 25 feet
• Operation Type: Nonautomatic
• Housing Material: Cast iron
• Hardware Material: Stainless steel
• Application: Residential sewage ejector and septic systems

Standard Information

• Brand: ZOELLER
• Manufacturer Part Number: ZOEL-267-0039