Zoeller ZOEL-267-0003 Cast Iron Sewage Pump 1/2 Hp 230V

Product Description

The ZOELLER ZOEL-267-0003 is an automatic submersible cast iron sewage pump rated at 1/2 horsepower and 230 volts. It is designed for transfer of sewage, effluent, and wastewater in residential and light commercial drainage systems. The pump operates at 1,725 RPM and delivers up to 128 GPM at 5 feet of head, dropping to 89 GPM at 10 feet and 50 GPM at 15 feet. With a shutoff head of 21.5 feet and a 2-inch discharge, it handles solids up to 2 inches in size. Licensed plumbers and pump service contractors are the primary installers. The cast iron housing provides durability in continuous submersible service.

This pump fits typical residential sewage ejector pit installations where gravity drainage to the municipal sewer is not available. It also suits effluent transfer and dewatering applications in basements, crawlspaces, and utility pits. The automatic float-activated operation eliminates the need for manual monitoring. The unit ships with a 10-foot UL Listed 3-wire neoprene cord and plug, making it ready for direct connection to a dedicated 230-volt circuit in standard residential service panels.

Key Features

• Automatic operation via integrated float switch for hands-free sewage ejection
• Cast iron construction for long-term durability in submerged, corrosive waste environments
• 2-inch discharge and 2-inch solids handling capacity reduces clog risk
• Delivers 128 GPM at 5 feet of head with a 21.5-foot shutoff head
• 10-foot UL Listed 3-wire neoprene cord and plug included
• UL and CSA approved for code-compliant installations

Compatibility

Designed as an OEM-style replacement or new-installation submersible sewage pump for residential and light commercial sewage ejector pit systems requiring a 2-inch discharge, 230-volt single-phase power, and automatic float-switch operation.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and all applicable local codes. Disconnect and lock out power to the circuit before lowering or removing the pump from the pit. Verify the discharge line check valve and union fittings are in place before commissioning. Do not run the pump dry or operate it outside of its rated voltage range.