Z-flex ZF-2SVEDWCF03 Z-vent Condensation Drain Pipe 3 Inch

Product Description

The Z-FLEX ZF-2SVEDWCF03 is a horizontal condensation drain pipe designed for use with Z-Vent venting systems on high-efficiency, condensing appliances. This fitting manages condensate runoff produced during the combustion process in condensing furnaces, boilers, and water heaters, directing moisture away from the appliance and vent system. Weighing under 1 pound at 0.99 pounds, it is a lightweight component sized at 3 inches to match standard Z-Vent vent pipe diameters. Licensed HVAC technicians and plumbers typically install this fitting as part of a complete venting assembly on new installations or system retrofits.

This condensation drain pipe is suited for horizontal vent runs on residential and light commercial condensing appliances. It is used where the vent system requires a dedicated condensate drainage point along a horizontal section. The 3-inch diameter fits within Z-Vent single-wall stainless steel vent systems commonly installed on Category IV appliances, which produce acidic condensate that must be managed and drained properly to protect the vent system and appliance.

Key Features

• 3-inch diameter fits standard Z-Vent venting system pipe sizing
• Horizontal orientation designed for condensate drainage along horizontal vent runs
• Lightweight construction at 0.99 pounds for easy handling during installation
• Compatible with high-efficiency condensing appliances that generate acidic condensate
• Part of the Z-Vent venting system product line for consistent fitment

Compatibility

Designed as an OEM-style component for use within Z-Flex Z-Vent 3-inch single-wall venting systems on Category IV condensing appliances including high-efficiency furnaces, boilers, and water heaters.

Installation Notes

Installation should be performed by a licensed HVAC technician or plumber in accordance with the appliance manufacturer instructions and local mechanical codes. Shut down and de-energize the appliance before beginning any work on the vent system. Ensure the condensate drain line connected to this fitting is properly pitched and routed to an approved drain point. Verify all vent joints are sealed per the Z-Vent system requirements to prevent flue gas or condensate leakage.

Technical Specifications

• Pipe Diameter: 3 inches
• Orientation: Horizontal
• Weight: 0.99 pounds
• UPC: 663053021059

Standard Information

• Brand: Z-FLEX
• Manufacturer Part Number: ZF-2SVEDWCF03