Xylem 10cs05422c Submersible Well Pump 0.5 Hp 230V

Product Description

The XYLEM 10cs05422c is a standard-capacity submersible well pump designed for residential and light commercial groundwater applications. Built for 4-inch well casings, this 10-stage pump delivers consistent water lift performance driven by a 0.5 HP motor operating at 230 volts on a 2-wire configuration. The 2-wire setup integrates the start components inside the motor, eliminating the need for a separate control box and simplifying installation in the field. Licensed well pump installers and plumbing contractors rely on this type of pump for reliable, continuous-duty water delivery from drilled wells.

This pump is suited for residential potable water systems where a 4-inch minimum casing diameter is present. The 10-stage design allows the unit to develop the head pressure needed for deeper well installations or systems with higher discharge requirements. It is commonly installed in single-family homes and small agricultural or irrigation applications where a 0.5 HP draw is appropriate for the service load. The 2-wire motor design reduces above-ground wiring complexity and is compatible with standard single-phase residential electrical service.

Key Features

• 10-stage impeller configuration for elevated head pressure output
• 2-wire motor design with built-in start components — no external control box required
• Rated for 4-inch well casings, the most common residential drilled well diameter
• 0.5 HP motor at 230 volts for efficient single-phase operation
• Standard-capacity design suitable for continuous-duty residential water service

Compatibility

Designed as an OEM-style submersible well pump for use in 4-inch inside-diameter drilled well casings on 230-volt single-phase electrical systems.

Installation Notes

Installation should be performed by a licensed well pump contractor or plumber in accordance with local plumbing codes and applicable state well construction regulations. Disconnect and lock out all electrical power before handling the pump, drop cable, or pitless adapter. The 2-wire motor requires proper wire sizing and a compatible pressure switch rated for the pump load — consult NEC Article 430 for motor circuit requirements. Do not run the pump dry, as submersible motors depend on the surrounding water column for cooling.

Technical Specifications

• Motor Size: 0.5 HP
• Voltage: 230 volts
• Wire Configuration: 2-wire
• Well Casing Size: 4 inches
• Number of Stages: 10

Standard Information

• Brand: XYLEM
• Manufacturer Part Number: 10cs05422c