Wooster Brush RR982-4 1/2 Roller Cover 4in X 1/2in Nap 2 Pack

Product Description

The WOOSTER BRUSH RR982-4 1/2 is a Jumbo-Koter Super/Fab roller cover designed for applying flat, eggshell, and satin paints on interior and exterior surfaces. Each pack contains two 4-inch roller covers with a 1/2-inch nap depth and a closed end construction. The shed-resistant fabric minimizes fiber loss during application, and the built-in Hydro Flow Technology regulates paint release for a consistent, controlled coat. This cover fits standard Jumbo-Koter frames and is suited for smooth to slightly textured surfaces. Painters, remodeling contractors, and facilities maintenance crews are the primary installers.

This roller cover is sized for trim, cabinet faces, doors, and other detail work where a full-sized roller is too large. The 4-inch width gives better control in tight areas while still holding enough paint to reduce reload frequency. The 1/2-inch nap is appropriate for smooth to lightly textured drywall, wood, and similar substrates when using flat, eggshell, or satin finish coatings. The 2-pack configuration reduces downtime on multi-surface jobs.

Key Features

• 4-inch width with 1/2-inch nap depth for detail and trim work
• Closed end construction prevents paint seepage at the roller end
• Shed-resistant fabric reduces fiber contamination in the finish coat
• Hydro Flow Technology provides controlled, even paint release
• Compatible with flat, eggshell, and satin water-based and oil-based paints
• Sold as a 2-pack to extend working time between cover changes

Compatibility

Designed for use with flat, eggshell, and satin paints on smooth to lightly textured surfaces; fits standard 4-inch Jumbo-Koter roller frames.

Installation Notes

A licensed painter or general contractor typically installs and operates this cover using a compatible 4-inch roller frame. Before loading with paint, inspect the cover for loose fibers and pre-wet with water for latex paints or mineral spirits for oil-based coatings, then squeeze out excess. Do not force the cover onto an incompatible frame width, as improper fit can cause uneven nap contact and inconsistent film thickness. Dispose of used covers in accordance with local regulations when working with solvent-based coatings.