Wooster Brush RR724-9 Roller Cover 9in 1/2in Nap 3 Pack

Product Description

The WOOSTER BRUSH RR724-9 is a 9-inch roller cover with a 1/2-inch nap, sold in a 3-pack under the Pro-Doo-Z line. It is built for semi-rough surface applications and features a proprietary high-density white fabric with a golden pinstripe that stays resilient under repeated loading. The fabric is shed-resistant and resists matting, which keeps the finish consistent from start to finish. The core is a green double-thick polypropylene construction that resists water, solvents, and cracking. Painting contractors, finish carpenters, and maintenance professionals reach for this cover when applying paints, enamels, primers, urethanes, and epoxies on surfaces that would chew up a standard nap.

This roller cover is suited for residential and commercial painting work on semi-rough surfaces such as textured drywall, light stucco, block, and similar substrates. The 1/2-inch nap depth gives enough fabric to carry adequate paint volume into surface texture without leaving excessive stipple on smoother areas. The 3-pack format is practical for production work where covers are rotated or replaced mid-job to maintain a consistent finish quality. Compatible with standard 9-inch roller frames.

Key Features

• 9-inch cover width with 1/2-inch nap depth for semi-rough surfaces
• Proprietary high-density white fabric with golden pinstripe resists matting and shedding
• Green double-thick polypropylene core resists water, solvents, and cracking
• Compatible with paints, enamels, primers, urethanes, and epoxies
• 3-pack format supports production painting workflows

Compatibility

Designed for use with standard 9-inch roller frames. Suitable for semi-rough interior and exterior surfaces when applying a wide range of coatings including latex and oil-based paints, enamels, primers, urethanes, and epoxies.

Installation Notes

Painting contractors and maintenance professionals install this cover onto a standard 9-inch roller frame cage. Before use, remove any loose fibers by wrapping the cover with painter's tape and peeling it off. For solvent-based coatings, ensure adequate ventilation per applicable safety guidelines. Clean or replace the cover promptly after use to maintain the core and fabric integrity for subsequent applications.