Wirepath SP-RG6Q-DB-1000-BLK RG6Q Coaxial Cable 1000 Ft

Product Description

The WIREPATH SP-RG6Q-DB-1000-BLK is a quad-shielded RG6Q solid copper coaxial cable supplied on a 1000-foot spool in black jacket. RG6Q coax is the standard choice for satellite, antenna, and cable television distribution runs where signal integrity and shielding performance matter. The quad-shield construction provides four layers of shielding compared to the two layers found on standard RG6, significantly reducing signal interference and ingress across the frequency range used by modern RF and digital video systems. Licensed low-voltage technicians, AV installers, and structured wiring contractors specify this cable for both residential and light commercial projects.

This cable is suited for satellite dish feeds, over-the-air antenna drops, cable television home runs, and MDU distribution wiring. The 1000-foot spool length supports full-structure pulls without mid-run splices, making it practical for new construction and large retrofit jobs. The black jacket is appropriate for outdoor conduit runs or installations where a black exterior finish is preferred. Installers working to SCTE or ANSI/TIA cabling standards will find this cable consistent with quad-shield RG6Q requirements for broadband and satellite applications.

Key Features

• Quad-shield construction reduces RF interference and signal ingress versus standard dual-shield RG6
• Solid copper center conductor supports low-loss performance on long runs
• 1000-foot spool minimizes mid-run splices on whole-structure installations
• Black jacket suitable for conduit pulls and installations requiring a dark exterior finish
• Shielded coaxial category appropriate for satellite, CATV, and antenna distribution

Compatibility

Designed as a standard RG6Q coaxial cable for use with F-connector terminations in residential and light commercial satellite, antenna, and cable television distribution systems.

Installation Notes

Installation should be performed by a licensed low-voltage technician or structured wiring contractor following applicable local codes and ANSI/TIA standards. Terminate with compression-style F-connectors rated for quad-shield RG6Q cable to ensure full shielding continuity at each end. Avoid sharp bends below the cable minimum bend radius, and do not staple through the jacket or crush the cable during routing. Verify signal levels at each outlet after installation using a signal meter before closing up walls or ceilings.