Wirepath SP-122-500-WH 12 Awg 2-conductor Wire 500 Ft

Product Description

The WIREPATH SP-122-500-WH is a 12 AWG, 2-conductor speaker wire supplied in a 500-foot spool. Rated for non-plenum environments, this wire is designed for in-wall and in-ceiling audio distribution runs in residential and light commercial installations. The 12-gauge conductor size supports longer cable runs with reduced signal loss, making it a practical choice for whole-home audio systems, distributed speaker zones, and dedicated home theater setups. Licensed audio-visual installers and low-voltage technicians are the primary installers of this product.

This wire is suited for non-plenum, open-air, and conduit-routed audio applications in residential and light commercial buildings. Typical installations include multi-room audio distribution, in-wall speaker wiring, and custom AV integrations where a 500-foot continuous spool reduces the need for mid-run splices. The white jacket blends with standard wall and ceiling finishes for clean finished appearances in occupied spaces.

Key Features

• 12 AWG conductor gauge supports extended speaker runs with lower resistance
• 2-conductor configuration for standard stereo or mono speaker connections
• 500-foot spool reduces mid-run splices on larger installs
• White jacket finish integrates cleanly with standard residential trim and finishes
• Non-plenum rated — appropriate for open-air, conduit, and non-air-handling space routing

Compatibility

Designed for use with standard passive speakers and conventional speaker-level amplifier outputs in non-plenum residential and light commercial audio distribution systems.

Installation Notes

Installation should be performed by a licensed low-voltage technician in accordance with applicable local electrical codes and NEC Article 725 requirements for Class 2 and Class 3 wiring. This product is non-plenum rated and must not be routed through air-handling spaces or plenum ceilings where a CL-P or CMP rating is required. De-energize all amplifier and audio equipment before making speaker connections. Verify conductor polarity at both ends of the run before terminating to maintain proper speaker phase alignment.