Wiremold UL2065BD Power Outlet Strip 24 Outlets 120V 15A

Product Description

The WIREMOLD UL2065BD is a 24-outlet power strip designed for raceway-mount installation in commercial and industrial environments. Built from aluminum in a gray finish, this strip measures 72 inches in length and runs on 120 volts at 15 amps, making it suitable for powering multiple low-draw devices from a single circuit. It ships with a 15-foot cord and features a NEMA 5-15R outlet configuration. Outlets are spaced at 2.5 inches on center, providing consistent access along the full length of the strip. The unit carries a cULus listing, confirming it meets recognized safety standards for electrical components.

This outlet strip is intended for raceway-mounted applications where a clean, organized power distribution solution is needed along a wall or workstation run. Common installations include commercial offices, laboratories, data rooms, school classrooms, and industrial workbenches where multiple devices must be powered from a single 15-amp branch circuit. The aluminum housing provides durability in demanding environments. A licensed electrician typically handles the branch circuit connection, while the strip itself can be field-installed into compatible raceway systems.

Key Features

• 24 NEMA 5-15R outlets spaced 2.5 inches apart along a 72-inch aluminum body
• Rated at 120 volts and 15 amps for standard 15-amp branch circuit compatibility
• 15-foot power cord included for flexible placement within the installation area
• Raceway-mount design integrates with compatible surface raceway systems
• Aluminum construction in gray finish for durability and a clean appearance
• cULus Listed — meets recognized safety standards for electrical power strips

Compatibility

Designed for raceway-mount installation compatible with surface raceway systems that accept a 72-inch power strip with NEMA 5-15R outlets on 120-volt, 15-amp circuits.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC). De-energize the branch circuit at the panel before making any connections to the strip or raceway. Verify that the branch circuit is rated for 15 amps at 120 volts before connecting the strip. Do not exceed the rated amperage of the strip or the connected branch circuit.