Wiremold NM20GBA512 Power Outlet Strip 5-outlet Raceway

Product Description

The WIREMOLD NM20GBA512 is a 5-outlet power outlet strip designed for raceway-mount installations in commercial and light industrial environments. Rated at 120 volts and 15 amps with a NEMA 5-15P plug configuration, it splits across 2 circuits to help distribute load efficiently. The 5-foot power cord provides reach from a wall outlet or raceway power source to the strip, while 12-inch outlet spacing reduces crowding when plugging in multiple devices. The ivory plastic housing is suited for surface-mounted raceway systems. Licensed electricians and facilities technicians are the typical installers for this type of strip in structured wiring or raceway builds.

This outlet strip is intended for use within Wiremold raceway systems commonly found in commercial offices, classrooms, retail counters, and light industrial workstations. The dual-circuit design supports separation of connected loads within a single strip run. The 5-foot strip length and 12-inch outlet spacing make it practical for benchtop, counter, or wall-mounted raceway channel installations where multiple device connections are needed in a fixed location. It is not a portable power strip and should be treated as a permanent or semi-permanent wiring accessory.

Key Features

• 5 outlets with 12-inch spacing to reduce plug crowding
• 2-circuit configuration for distributed load management
• 120-volt, 15-amp rating with NEMA 5-15P plug
• 5-foot power cord for flexible raceway positioning
• Raceway-mount design integrates with surface wiring channel systems
• Ivory plastic housing at 1-inch overall height for low-profile installation

Compatibility

Designed for use with Wiremold raceway systems that accept surface-mount outlet strips. Intended for 120-volt, 15-amp branch circuits with NEMA 5-15 receptacle configurations.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC requirements for surface wiring systems. De-energize the branch circuit at the panel before mounting or connecting the strip to the raceway. Verify that the branch circuit amperage and voltage match the strip ratings before energizing. Do not exceed the 15-amp total load rating across both circuits combined.