Wiremold Legrand 25DTC-412WH Blank Steel Raceway 12 Feet

Product Description

The WIREMOLD LEGRAND 25DTC-412WH is a blank steel surface raceway section finished in white, designed to house and protect electrical wiring runs along walls, baseboards, or ceilings. At 12 feet in length, this section provides continuous wire management without surface penetrations or exposed conduit. The steel construction offers durability appropriate for commercial and light industrial environments. Electricians and facilities maintenance crews install these sections to route low-voltage data cables, power conductors, or combined wire bundles in a clean, code-compliant channel that stays accessible for future pulls or modifications.

This raceway section is suited for commercial office buildouts, retail environments, schools, and healthcare facilities where surface-mounted wiring management is required. It is also used in residential applications where fishing wires through walls is not practical. The blank designation means no pre-punched outlets or device knockouts are included, making it appropriate for straight wire runs between device sections or fittings. The white finish coordinates with standard interior trim in most commercial and residential settings.

Key Features

• Blank steel channel with no pre-punched device openings — suitable for uninterrupted wire runs
• 12-foot length reduces the number of joints needed on long wall runs
• White powder-coat finish blends with standard interior wall and ceiling surfaces
• Steel construction provides mechanical protection for enclosed conductors
• Sold as a single piece (1 EA per unit)

Compatibility

Designed as an OEM-style surface raceway section compatible with the WIREMOLD LEGRAND 25DTC series raceway system, including fittings, couplings, and device sections within the same product family where specified by the manufacturer.

Installation Notes

Installation is typically performed by a licensed electrician in accordance with NEC Article 386 governing surface metal raceways. De-energize all circuits in the work area before pulling or terminating conductors inside the raceway. Sections are typically fastened to wall studs or masonry using appropriate anchors at intervals required by the applicable code. Do not exceed the conductor fill capacity specified in the NEC or the manufacturer documentation for this raceway series.