Winters P9U901404UC Pressure Gauge 0-60 Psi 2 in Npt

Product Description

The WINTERS P9U901404UC is an analog pressure gauge designed for industrial and mechanical system monitoring applications. It features a 2-inch diameter dial with a 0 to 60 psi range and connects via a 1/8-inch NPT center back mount. The steel case houses brass wetted parts, and a dampened movement mechanism reduces needle flutter caused by pressure spikes or vibration. The acrylic lens protects the dial face while maintaining clear readability. Accuracy is rated at 2.5 percent of full scale, conforming to ANSI/ASME Grade A standards. Licensed HVAC technicians, plumbers, and pipefitters typically install this gauge on low-pressure systems requiring reliable visual pressure indication.

This gauge suits residential and light commercial applications where a compact, panel-mounted pressure indicator is required. The U-clamp panel center back mount configuration allows flush or panel-surface installation without front-accessible hardware. Typical installations include water lines, compressed air systems, hydraulic circuits, and HVAC refrigerant or water loop monitoring where pressures remain within the 0 to 60 psi operating range. Its operating temperature range of -40 degrees F to 150 degrees F makes it suitable for both indoor mechanical rooms and outdoor enclosures in moderate climates.

Key Features

• 0 to 60 psi analog pressure range with 2.5 percent of full-scale accuracy
• 2-inch (50 mm) dial diameter for clear, compact panel display
• Dampened movement reduces needle oscillation on pulsating or vibrating lines
• Brass wetted parts resist corrosion on water, air, and compatible fluid systems
• Steel case provides mechanical protection in industrial panel environments
• U-clamp panel center back mount for clean panel-flush installation
• Meets ANSI/ASME Grade A, ASME B40.100, CRN, and IP52 standards

Compatibility

Designed as an OEM-style replacement or new-installation pressure gauge for systems requiring a 1/8-inch NPT center back mount connection and a 0 to 60 psi operating range. Part of the WINTERS P9U series.

Installation Notes

Installation should be performed by a qualified plumber, pipefitter, or HVAC technician following applicable local codes and ASME B40.100 guidelines. Shut down system pressure and relieve line pressure completely before removing or installing the gauge. Apply thread sealant to NPT threads in accordance with standard practice, and avoid over-tightening, which can crack the case or distort the connection. Verify the system operating pressure falls within the 0 to 60 psi range before returning the line to service.