Wika 9314580 Pressure Gauge 60 Psi 4 Inch Dial

Product Description

The WIKA 9314580 is an analog pressure gauge designed for accurate pressure measurement in plumbing, HVAC, and industrial service applications. It features a 4-inch dial with a compound pressure range of 30 inches vacuum to 0 to 60 psi, making it suitable for systems that may experience both positive pressure and vacuum conditions. The case is constructed of brass and the gauge is liquid filled, which dampens needle vibration and extends service life in pulsating or high-cycle systems. Accuracy is rated at 1 percent of scale. The lower mount configuration accepts a 1/4-inch threaded connection. Licensed plumbers, HVAC technicians, and industrial maintenance professionals are the typical installers.

This gauge is suited for residential and light commercial applications where reliable pressure indication is needed at a glance. Typical uses include monitoring supply-side water pressure, pump discharge pressure, boiler system pressure, and chilled or hot water loop pressure. The liquid-filled construction makes it a practical choice for equipment rooms and mechanical spaces where vibration from pumps or compressors could cause premature wear on a dry gauge. The lower mount orientation is standard for panel and pipe installations where the gauge face must point outward from the pipe axis.

Key Features

• Compound range: 30 inches vacuum to 0 to 60 psi
• Liquid-filled case dampens needle flutter in high-vibration environments
• Brass case construction for corrosion resistance in wet service conditions
• 1 percent of scale accuracy for reliable field readings
• 4-inch dial for easy readability at working distance
• Lower mount with 1/4-inch thread fits standard pipe fittings

Compatibility

Designed as an OEM-style replacement or service gauge for residential and commercial plumbing, HVAC, and hydronic systems requiring a lower-mount analog pressure gauge with a 1/4-inch threaded connection.

Installation Notes

Installation should be performed by a licensed plumber or qualified HVAC or mechanical technician. Shut off system pressure and relieve all pressure from the line before removing or installing the gauge. Use an appropriate thread sealant or PTFE tape on the male threads and avoid overtightening, which can crack the gauge body or fitting. Verify the operating pressure range of the system does not exceed 60 psi before placing the gauge in service.