Wika 30060A005G4MM Bimetal Dial Thermometer 6 in Stem

Product Description

The WIKA 30060A005G4MM is a bimetal dial thermometer designed for temperature measurement in HVAC, plumbing, and light industrial applications. It reads a range of 0 to 200 degrees F and features a back-connected mount configuration with a 6-inch stem. The housing and stem are constructed from 18-8 stainless steel, providing corrosion resistance in wet or chemically active environments. With a stated accuracy of plus or minus 1.0 percent of full scale, this instrument delivers reliable readings for field diagnostics, system commissioning, and process monitoring. Licensed HVAC technicians and plumbers are the primary installers of this type of thermometer.

This thermometer suits residential and light commercial systems where a permanently mounted temperature-reading device is required at a pipe, tank, or duct penetration. The back-connected mount allows the dial face to sit flush against a panel or surface while the 6-inch stem extends into the medium being measured. It is well suited for hot water heating systems, chilled water loops, domestic hot water lines, and HVAC air-handling installations requiring local temperature indication without electronic sensors.

Key Features

• Temperature range of 0 to 200 degrees F (-15 to 90 degrees C) for common HVAC and plumbing service conditions
• Back-connected mount for clean panel or pipe-mounted installations
• 6-inch stem length provides adequate immersion depth in pipes and tanks
• 18-8 stainless steel construction resists corrosion in wet and treated-water environments
• Plus or minus 1.0 percent full-scale accuracy suitable for field and process monitoring

Compatibility

Designed as an OEM-style replacement or new-installation bimetal thermometer for residential and commercial HVAC, plumbing, and light industrial systems requiring a back-connected dial thermometer with a 6-inch stem.

Installation Notes

Installation is typically performed by a licensed HVAC technician or plumber. Shut off fluid flow and depressurize or drain the line before inserting or removing the stem from a thermowell or pipe fitting. Use a thermowell whenever the application involves high-velocity flow or corrosive media to protect the stem and allow removal without system shutdown. Follow applicable IPC and IFGC guidelines for pipe penetrations and fitting torque.