White Lightning W32000010 Acrylic Silicone Hybrid Caulk 10 Oz

Product Description

The WHITE LIGHTNING W32000010 is an acrylic silicone hybrid caulk supplied in a 10 oz cartridge. It bridges the flexibility of silicone with the paintability of acrylic latex, making it a practical choice for sealing gaps and joints in both interior and exterior applications. The compound achieves a tack-free surface in 12 minutes, allowing follow-on work to proceed without long delays. It performs across a temperature range of -30 degrees F to 180 degrees F, making it suitable for use in climates where seasonal expansion and contraction stress sealant joints. Licensed contractors and skilled tradespeople use this product when a paintable, durable perimeter seal is required on doors, windows, and trim assemblies.

The W32000010 is formulated for indoor and outdoor use on door and window frames, trim transitions, and general construction joint sealing. It adheres directly to glass, metal, plastic, vinyl, and wood substrates without a separate primer in most applications. Coverage reaches approximately 24.20 linear feet per cartridge at typical bead sizes. This product is suited for residential and light commercial work wherever a Class ASTM C-834 paintable sealant is specified.

Key Features

• Acrylic silicone hybrid chemistry — paintable after cure with latex or oil-based coatings
• Tack-free in 12 minutes, reducing downtime during trim and finish work
• Rated for -30 degrees F to 180 degrees F service temperature
• Adheres to glass, metal, plastic, vinyl, and wood without primer on most substrates
• Rated for indoor and outdoor exposure
• Meets ASTM C-834 standard for latex sealants

Compatibility

Designed for use on door and window assemblies with glass, metal, plastic, vinyl, and wood substrates, consistent with ASTM C-834 paintable caulk applications in residential and light commercial construction.

Installation Notes

Application is performed with a standard 10 oz caulk gun. Surface temperature must be at or above 50 degrees F at the time of application for proper adhesion and cure. Surfaces should be clean, dry, and free of loose paint, dust, or oil before applying the bead. Tool the sealant immediately after application and allow to reach tack-free state before painting or exposing to moisture.