White Lightning W12AF0010 Acrylic Latex Caulk 10 Oz

Product Description

The WHITE LIGHTNING W12AF0010 is an acrylic latex caulk in a 10 oz cartridge, designed for sealing gaps and joints in a wide range of construction and maintenance applications. Part of the 3006 series, it bonds to glass, metal, plastic, and wood, making it a versatile option for both interior and exterior work. The formula is paintable once cured, which suits finish work where aesthetics matter. It achieves a tack-free surface in 12 minutes and handles operating temperatures from -30 degrees F to 180 degrees F. Licensed contractors, maintenance technicians, and skilled tradespeople working in HVAC, plumbing, and general construction will find this a reliable go-to sealing compound.

This caulk is suited for both indoor and outdoor use, covering residential and light commercial applications. Typical installs include sealing around window frames, pipe penetrations, trim joints, and fixture perimeters. It applies at temperatures between 50 degrees F and 120 degrees F, so it works across most standard job-site conditions. One 10 oz cartridge provides approximately 24.20 linear feet of coverage depending on bead size. It meets ASTM C-834 standards, which makes it acceptable for a broad range of building envelope and mechanical penetration seal work.

Key Features

• Acrylic latex formula bonds to glass, metal, plastic, and wood
• Tack-free in 12 minutes for faster workflow on the job
• Paintable after cure — compatible with standard latex and oil-based topcoats
• Rated for indoor and outdoor use across a wide temperature range
• Meets ASTM C-834 standard for latex sealing compounds
• Approximately 24.20 linear feet of coverage per 10 oz cartridge

Compatibility

Designed as a general-purpose acrylic latex caulk suitable for sealing joints and gaps on glass, metal, plastic, and wood substrates in both indoor and outdoor environments.

Installation Notes

Apply using a standard caulk gun with a properly cut cartridge tip sized to the joint. Surface should be clean, dry, and free of dust, grease, or old sealant before application. Do not apply when ambient or surface temperatures fall below 50 degrees F or exceed 120 degrees F. Tool the bead immediately after application for best adhesion and appearance.