Westlake Pipe Fittings L1936 SDR-35 Pvc 11-1/4 Elbow 6 in

Product Description

The WESTLAKE PIPE FITTINGS L1936 is a 6-inch gasketed SDR-35 PVC elbow with an 11-1/4 degree bend angle, designed for gravity-flow sewer and drainage systems. The gasketed bell end provides a flexible, water-tight joint without solvent cement, allowing for thermal movement and simplified field assembly. At 2.21 pounds, it is lightweight enough for single-person handling in trench conditions. Licensed plumbers and underground utility contractors are the typical installers for this fitting in residential and commercial drainage applications.

This elbow is used in buried gravity sewer laterals and storm drainage runs where a shallow directional change is required. The 11-1/4 degree deflection is suited for gradual alignment corrections along a pipeline route without creating excessive flow turbulence. SDR-35 PVC is the standard material specification for municipal and residential sanitary sewer service lines. It is typically installed below grade in trenched excavations following local plumbing code requirements.

Key Features

• 11-1/4 degree elbow angle for gradual directional changes in gravity sewer lines
• Gasketed bell end allows tool-free, solvent-free joint assembly in the field
• SDR-35 wall thickness rating meets standard specifications for sanitary sewer and storm drain service
• 6-inch diameter accommodates high-flow residential and light commercial sewer laterals
• Lightweight PVC construction at 2.21 pounds simplifies handling during trench installation

Compatibility

Designed as an OEM-style replacement and new-construction fitting compatible with 6-inch SDR-35 gasketed PVC sewer pipe and fittings systems used in gravity-flow sanitary sewer and storm drainage applications.

Installation Notes

Installation should be performed by a licensed plumber or underground utility contractor in accordance with the International Plumbing Code (IPC) and applicable local amendments. Lubricate the gasket with an approved pipe joint lubricant before pushing the spigot end home into the bell. Ensure proper bedding and backfill compaction around the fitting to prevent joint deflection beyond rated limits. Do not use solvent cement on gasketed SDR-35 joints.

Technical Specifications

• Pipe Size: 6 inches
• Bend Angle: 11-1/4 degrees
• Pipe Standard: SDR-35
• Material: PVC
• Joint Type: Gasketed bell end
• Weight: 2.21 pounds
• UPC: 622454430198

Standard Information

• Brand: WESTLAKE PIPE FITTINGS
• Manufacturer Part Number: L1936