Westlake Pipe Fittings g2012 Pvc 90 Elbow 12 in Sdr 35

Product Description

The WESTLAKE PIPE FITTINGS g2012 is a 12-inch SDR 35 PVC gasketed 90-degree elbow (1/4 bend) designed for gravity sewer and storm drainage systems. This large-diameter fitting accepts rubber-gasket push-joint connections on both ends, allowing fast, leak-resistant field assembly without solvent cement. At 18 pounds, it is sized for main-line sewer work where a full quarter-turn change of direction is required. The SDR 35 wall dimension ratio meets the standard for non-pressure sewer service and is widely specified in municipal and commercial underground drainage designs.

This fitting is used in underground gravity sewer, storm drain, and drainage force-main bypass applications at the 12-inch pipe size. It is suited for residential subdivision main lines, commercial site utilities, and municipal sewer lateral connections where SDR 35 PVC pipe is the specified material. Licensed plumbers and underground utility contractors install this fitting during trench work, conforming to local plumbing codes and ASTM D3034 or ASTM F679 sewer pipe standards at this diameter.

Key Features

• 90-degree (1/4 bend) elbow provides a full quarter-turn direction change in gravity sewer runs
• Gasketed push-joint ends allow fast, tool-free connection without solvent cement
• SDR 35 PVC construction meets standard wall requirements for non-pressure sewer service
• 12-inch fitting size suits main-line sewer and large-diameter storm drain installations
• PVC material resists corrosion, root intrusion chemicals, and typical sewer gas environments

Compatibility

Designed as an OEM-style replacement and new-construction fitting compatible with 12-inch SDR 35 PVC sewer pipe using push-on gasketed joints per standard sewer pipe specifications.

Installation Notes

Installation should be performed by a licensed plumber or qualified underground utility contractor in accordance with applicable local plumbing codes and ASTM standards for SDR 35 sewer pipe. Ensure the trench is properly bedded and that pipe ends are clean and lubricated before seating the gasket joint. Never exceed the angular deflection limits of the gasketed connection. Inspect the rubber gasket for correct seating before backfilling.