Weiler 94662 Knotted Wheel Brush 6 Inch Carbon Steel

Product Description

The WEILER 94662 is a knotted carbon steel wheel brush designed for aggressive surface preparation, weld cleaning, and deburring on metal workpieces. The 6-inch outside diameter and 0.5-inch face width deliver focused contact pressure along narrow weld seams and tight joint areas. Stringer bead twist wire construction concentrates wire tips at the work surface for maximum cutting action. With a maximum operating speed of 12500 RPM, this brush is suited for use on angle grinders and bench grinders with a compatible 5/8-11 threaded arbor. Licensed trades and fabricators working on structural steel, pipe, and heavy plate will find the wire diameter range of 0.0200 to 0.0299 inches appropriate for medium-to-heavy mill scale and spatter removal.

This wheel brush is a standard tool in metal fabrication shops, welding operations, and industrial maintenance environments. It is used for pre-weld joint cleaning, post-weld spatter removal, rust and scale removal, and surface conditioning on ferrous metals. The 5/8-11 threaded mount makes it compatible with common right-angle grinders used in structural and pipe welding applications. The 1.375-inch trim length provides consistent wire contact throughout the brush service life.

Key Features

• Knotted stringer bead twist wire for aggressive cleaning and weld spatter removal
• Carbon steel fill material rated for ferrous metal surface prep
• 6-inch outside diameter with 0.5-inch face width for targeted contact
• 5/8-11 threaded arbor mount for direct grinder attachment without a separate shank
• 12500 RPM maximum speed compatible with standard angle grinders
• Wire diameter range of 0.0200 to 0.0299 inches for medium-to-heavy scale and spatter

Compatibility

Designed for use with angle grinders and bench grinders equipped with a 5/8-11 threaded arbor. No separate shank adapter is required.

Installation Notes

Installation and operation of wire wheel brushes should be performed by qualified personnel following ANSI B11 and OSHA applicable safety standards for abrasive and power brush tools. Always power down and disconnect the grinder before mounting or removing the brush. Inspect the brush for damage before each use and never exceed the marked maximum RPM. Eye protection and appropriate PPE are required during operation.