Weiler 93630 7 Inch Crimped Wheel Brush Carbon Steel

Product Description

The WEILER 93630 is a 7-inch diameter crimped wire wheel brush designed for surface preparation, deburring, and cleaning on metal and other hard materials. It mounts via a 5/8-inch arbor hole and runs at a maximum of 6,000 RPM. The fill material is medium-grade carbon steel wire in the 0.010 to 0.019 inch diameter range, with a trim length of 1-9/16 inches and a face width of 3/4 inches. This brush is used by metalworkers, fabricators, maintenance technicians, and welders who need consistent wire contact and reliable stock removal on bench grinders or similar arbor-driven machines.

This wheel brush is suited for stationary bench grinder applications in fabrication shops, maintenance facilities, and industrial job sites. Typical tasks include weld spatter removal, scale removal, rust cleaning, and surface finishing on ferrous metals. The crimped wire construction delivers a more flexible cutting action compared to knotted wire, making it appropriate for general-purpose surface work where a controlled, even finish is required. No shank is included, so a compatible arbor spindle is required for mounting.

Key Features

• 7-inch outside diameter for broad surface contact on bench-mounted applications
• Crimped carbon steel wire provides flexible, consistent abrasive action
• Medium wire grade with 0.010 to 0.019 inch filament diameter range for general-purpose work
• 3/4-inch face width and 1-9/16-inch trim length for controlled reach and wire flex
• 5/8-inch arbor hole mount — no shank included, fits standard bench grinder arbors
• Rated to 6,000 RPM maximum for safe operation on common stationary grinders

Compatibility

Designed for use with bench grinders and arbor-driven machines equipped with a 5/8-inch arbor spindle. Verify that the machine speed does not exceed the 6,000 RPM rating of this brush before installation.

Installation Notes

Installation should be performed by a qualified technician familiar with abrasive wheel safety. Always power down and disconnect the machine from its power source before mounting or removing the brush. Confirm the arbor spindle diameter matches the 5/8-inch hole before tightening, and inspect the brush for damage prior to use. Always wear appropriate PPE including eye protection and gloves, and ensure the machine guard is in place before operating.