Watts Brass Tubular PL-3023 Quick Connect Tee 3/8 Inch Od

Product Description

The WATTS BRASS TUBULAR PL-3023 is a quick connect tee fitting designed for push-in tube connections on 3/8 inch outside diameter tubing. All three ports accept 3/8 inch OD tube, making this a uniform tee configuration suitable for splitting or joining lines in a single plane. The fitting is rated for use with polyethylene and soft copper tubing only. It is not approved for steel tubing and must not be used in concealed installations. Plumbers and water treatment technicians are the primary installers of this fitting in accessible, visible piping runs.

The PL-3023 is commonly used in residential and light commercial water supply applications, including under-sink filtration systems, reverse osmosis lines, refrigerator water supply connections, and similar low-pressure tubing runs. Its quick connect design eliminates the need for soldering, compression sleeves, or ferrule tools at the fitting, speeding up installation in tight service spaces. The fitting ships in a pack of 5 units.

Key Features

• Uniform 3/8 inch OD quick connect ports on all three legs
• Compatible with polyethylene and soft copper tubing
• Push-in connection requires no solder, ferrule, or compression nut
• Not approved for steel tubing or concealed installations
• Packaged in quantities of 5 per pack

Compatibility

Designed for use with 3/8 inch OD polyethylene or soft copper tubing in accessible, non-concealed plumbing applications. Not suitable for steel tubing or any installation where the fitting will be enclosed within walls, ceilings, or other concealed spaces.

Installation Notes

Installation is performed by licensed plumbers or qualified water treatment technicians. Shut off the water supply and relieve line pressure before making or breaking any connections. Tubing ends should be cut square and deburred before insertion to ensure a proper seal. Do not use this fitting with rigid copper, CPVC, steel, or any tubing type not listed as compatible.