Watts 123628 Lfis6301 ball valve w/drain 1/2 lead free cxc

Product Description

The Watts 123628 LFIS6301 is a lead-free ball valve with a side drain port to drain or vent the downstream line when the valve is off. The full port orifice ensures maximum flow capacity, and the ball is wiped clean during each valve operation. Suitable for a full range of liquids and gases.

• Full port
• Lead free
• Side drain port

Product Highlights

This Watts ball valve features a side drain port, full port design, and lead-free construction.

Product Information

Standard Information

• Brand: WATTS
• Manufacturer Part Number: 123628
• Country of Origin: China

Technical Specifications

• Manufacturer: Watts
• Manufacturer #: 123628
• Type: Ball Valve with Drain
• Material: Brass
• Connection Type: Solder
• Nominal Size: 1/2 in
• Pressure Rating: 600 PSI
• Body Material: Copper Silicon Alloy
• Handle Material: Zinc-Plated Carbon Steel with Vinyl Insulator
• Lead-Free/Contains Lead: Yes
• Model: LFIS6301
• Opening Size: 1/2 in
• Operator Type: Handle
• Packing Material: PTFE Stem
• Seal Material: NBR
• Seat Material: Virgin PTFE
• Stem Material: Brass
• Temperature Rating: 0 - 350 deg F
• Trim Material: Brass Ball
• Outlet Size: 1/2 IN
• Inlet Size: 1/2 IN
• Ball Material: Brass
• Inlet Type: Socket
• Shaft Material: Brass
• Max. Operating Temp.: 350 [instruction]You are an expert product specification validator for electrical/electronic equipment. Your task is to validate whether the provided specifications, weight, and dimensions are reasonable and accurate for the given product based on your knowledge of electrical/electronic products.You will be provided with:- Product title- Product description - Current specifications (key-value pairs)- Current weight (in pounds)- Current dimensionsYour task is to:1. Analyze if the specifications are reasonable for this type of product2. Identify any specifications that are clearly incorrect or unrelated3. Validate if the weight is reasonable for this product category4. Validate if the dimensions are reasonable for this product category5. Remove or flag any specifications that are clearly wrong**VALIDATION CRITERIA:****For Specifications:**- Check if specification keys and values make sense for the product type- Remove specifications that are clearly for a different product category- Flag unrealistic values (e.g., 1000V for a small consumer device, or 1mA for a high-power device)- Ensure electrical specifications align with the product type (voltage, current, power, frequency, etc.)- Remove generic or placeholder specifications**For Description and Specifications:**- **Remove non-product specifications such as:** * Shipping information (shipping method, delivery time, etc.) * Warranty details (warranty period, warranty type, warranty coverage, etc.) * Return policy information * Seller/vendor information * Pricing or discount information * Stock availability or inventory details * Customer reviews or ratings * Promotional or marketing details * Minimum order quantity (MOQ) details**For Weight:**- Validate if the weight is reasonable for the product size and type- Flag weights that are clearly incorrect (e.g., 0.01 lbs for a large transformer, or 500 lbs for a small connector)- Consider typical weight ranges for the product category- If weight is invalid or missing, estimate a reasonable weight based on: * Product type and category * Typical weight ranges for similar products * Dimensions (if available and valid) * Materials and construction typical for this product type**For Dimensions:**- Validate if dimensions are reasonable for the product type- Flag dimensions that are clearly incorrect (e.g., 1 inch for a large electrical panel, or 10 feet for a small component)- Check if dimensions are consistent with each other (length, width, height)- Remove placeholder or clearly wrong dimensions- **Extract individual dimension values (length, width, height) if available in the product information**- **All dimension values MUST be converted to inches.** If the source data uses other units (cm, mm, feet, meters, etc.), convert them to inches using standard conversions (1 foot = 12 inches, 1 cm = 0.393701 inches, 1 mm = 0.0393701 inches, 1 meter = 39.3701 inches).- If dimensions are provided in a combined format (e.g.,
• ) parse them into separate length, width, and height values- The validated_dimensions string should also be expressed in inches**OUTPUT FORMAT:**Respond with a JSON object containing:```json{ : {'key1': 'value1', 'key2': 'value2'}
• description: {'main_description': 'product description - cleaned of shipping, warranty, and other non-product information', 'bullet_points': [-9], 'product_highlights': 'product highlights - cleaned of shipping, warranty, and other non-product information'}
• validated_weight: [validated weight in pounds as float, or null if invalid]
• validated_dimensions: [validated dimensions string, or null if invalid]
• dimension_details: {'length': '[numeric value ONLY as float converted to inches — no units/metrics attached, or null if not available]', 'width': '[numeric value ONLY as float converted to inches — no units/metrics attached, or null if not available]', 'height': '[numeric value ONLY as float converted to inches — no units/metrics attached, or null if not available]'}
• removed_specifications: [{'key': 'removed_key', 'value': 'removed_value', 'reason': 'Reason for removal'}]
• weight_validation: {'is_valid': True, 'reason': 'Reason if invalid', 'estimated_weight': '[estimated weight in pounds as float if weight was invalid/missing, otherwise null]', 'estimation_basis': '[Explanation of how the weight was estimated, if applicable]'}
• dimensions_validation: {'is_valid': True, 'reason': 'Reason if invalid'}
• overall_confidence: [High/Medium/Low] - confidence in the validation results