Watts 0652031 Push-to-connect Tee Fitting 1x1x3/4 in

Product Description

The WATTS 0652031 is a push-to-connect tee tube fitting made from lead-free brass for use in potable water systems. It connects three tube runs in a tee configuration without soldering, threading, or crimping tools. The fitting accepts 1 inch OD on two ports and 3/4 inch OD on the third, with an EPDM o-ring seal rated to 250 psi working pressure. Licensed plumbers and experienced tradespeople install this fitting in residential and light commercial water supply lines where quick, reliable connections are required.

This fitting is suited for potable water distribution applications in residential plumbing, light commercial supply lines, and retrofit or repair work where torch-free installation is preferred. The push-to-connect design allows the fitting to be installed in tight spaces without special tooling, making it a practical choice for branch connections in water supply rough-in and service work. It is compatible with copper, PEX, and CPVC tubing of the appropriate OD dimensions.

Key Features

• Push-to-connect design requires no soldering, threading, or crimping tools
• Lead-free brass construction meets potable water safety requirements
• EPDM o-ring seal provides a reliable, watertight connection
• Rated to 250 psi maximum working pressure
• Tee configuration with 1 x 1 x 3/4 inch OD ports for branch connections

Compatibility

Designed for potable water applications. Compatible with tubing having outside diameters of 1 inch on two ports and 3/4 inch on the third port. Suitable for use with copper, PEX, and CPVC tubing of the specified OD dimensions where push-to-connect fittings are appropriate.

Installation Notes

Installation is performed by licensed plumbers in accordance with the International Plumbing Code and local jurisdictional requirements. Shut off and depressurize the water supply line before installing or removing the fitting. Ensure tube ends are cut square, deburred, and clean before insertion to the full depth mark for a proper seal. Do not exceed the rated working pressure of 250 psi.