Waterway Plastics PD-250VV-1V5A Spa Pump 1.5 Hp 2 Speed

Product Description

The WATERWAY PLASTICS PD-250VV-1V5A is a two-speed spa circulation and jet pump rated at 1.5 HP and designed for 230-volt operation. Built for residential and light-commercial hot tub applications, it delivers reliable hydraulic performance across both high- and low-speed modes, allowing system operators to balance jet pressure against energy consumption. Pool and spa service technicians install this pump as a direct replacement in systems where the original unit has failed or reached end of service life. The dual-speed motor makes it compatible with typical spa control systems that switch between circulation and full-jet operation.

This pump is used in Dynasty Spas installations, where it is referenced under Dynasty Spas part number 15509. It is suited for in-ground and above-ground spa systems requiring a 230-volt, two-speed motor assembly. Licensed pool and spa contractors handling warranty or out-of-warranty pump replacements will find this unit appropriate for that service scenario.

Key Features

• 1.5 HP motor output for strong jet and circulation performance
• Two-speed operation supports both high-pressure jet mode and low-draw circulation mode
• 230-volt electrical rating matches standard residential spa wiring configurations
• OEM-referenced replacement for Dynasty Spas systems under part number 15509
• Power Defender series design from WATERWAY PLASTICS, a recognized spa equipment manufacturer

Compatibility

Used in Dynasty Spas as a replacement for Dynasty Spas part number 15509. Verify motor voltage, horsepower rating, port configuration, and mounting dimensions against the existing pump before installation.

Installation Notes

Installation should be performed by a licensed pool and spa technician in accordance with applicable local codes and the NEC requirements for wet-location electrical equipment. Disconnect and lock out power at the spa disconnect panel before removing the existing pump. Shut off all water supply and allow system pressure to bleed before breaking any hydraulic connections. Do not run the pump dry, as seal damage will occur without water present in the volute.

Technical Specifications

• Horsepower: 1.5 HP
• Speed: 2 Speed
• Voltage: 230 volts

Standard Information

• Brand: WATERWAY PLASTICS
• Manufacturer Part Number: PD-250VV-1V5A