Waterstone 1200c-pn Hampton Cold Filtration Faucet

Product Description

The WATERSTONE 1200c-pn is a cold filtration faucet from the Hampton collection, built for installation at kitchen, prep, and bar sink setups where filtered or reverse osmosis water delivery is required. Constructed from solid brass throughout, it features a traditional C-spout with a 5.25-inch reach and a 1/4-turn ceramic disk valve cartridge for reliable shutoff. A lever handle provides single-hand operation, and the 360-degree swivel spout adds positioning flexibility at the point of use. Maximum flow rate is 1.1 gallons per minute. This faucet is designed for installation by licensed plumbers or experienced trade professionals.

The 1200c-pn is intended for use alongside existing kitchen, prep, or bar faucets as a dedicated filtration dispenser. It is compatible with reverse osmosis systems and connects via a 1/4-inch compression fitting, making integration with standard RO supply lines straightforward. The Hampton collection is available in twenty-four finish options, allowing the faucet to coordinate with a wide range of sink and countertop configurations in both residential and light-commercial applications.

Key Features

• Traditional C-spout design with 5.25-inch reach
• Solid brass construction for durability and corrosion resistance
• 1/4-turn ceramic disk valve cartridge for precise flow control
• 360-degree swivel spout for flexible positioning
• 1.1 GPM maximum flow rate
• 1/4-inch compression connection for direct RO system integration

Compatibility

Compatible with reverse osmosis filtration systems using standard 1/4-inch compression supply connections. Intended for use in conjunction with kitchen, prep, and bar faucets as a dedicated cold filtration dispenser.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC guidelines. Shut off the water supply and depressurize the filtration line before beginning work. The 1/4-inch compression connection should be made hand-tight and then snugged with a wrench — avoid overtightening, which can crack the fitting seat. Verify there are no leaks at the supply connection before returning the system to service.