Warwick Hanger 200-10 Natick Pipe Hanger 1-1/4 Inch

Product Description

The WARWICK HANGER 200-10 is a Natick-type pipe hanger designed to suspend copper tubing from floor joists in horizontal piping applications. Constructed from carbon steel with a copper-plated finish, it provides a compatible surface for direct contact with copper pipe without accelerating galvanic corrosion concerns typical of dissimilar metals. The hanger is sized specifically for 1-1/4-inch pipe and features a 12-inch drop length, making it suitable for installations where the pipe runs below floor framing with moderate clearance requirements. Each bag contains 25 hangers, supporting efficient rough-in work on residential and light commercial plumbing projects.

This hanger is used in horizontal piping runs where copper tubing must be secured and supported below floor joists. The Natick-style design is a standard in residential plumbing installations, commonly used by licensed plumbers during new construction and retrofit work. The 12-inch height accommodates typical floor joist depth scenarios, and the copper-plated finish keeps the hanger visually and metallurgically consistent with the tubing it supports.

Key Features

• Natick-type hanger design for horizontal copper tubing suspension
• Carbon steel construction with copper-plated finish for compatibility with copper pipe
• Sized for 1-1/4-inch pipe — both minimum and maximum rated pipe size
• 12-inch drop height suits standard floor joist clearance requirements
• Sold in bags of 25 for efficient job-site stocking

Compatibility

Designed for use with 1-1/4-inch copper tubing in horizontal applications suspended from floor joists. Intended as a standard Natick-style hanger for residential and light commercial plumbing systems.

Installation Notes

Installation is performed by licensed plumbers following local plumbing codes and IPC spacing requirements for copper tubing support. Power down or isolate the water system before making connections in the supported pipe run. Fasten the hanger securely to the floor joist using fasteners appropriate for the joist material and load. Avoid using uncoated ferrous hangers in direct contact with copper tubing, as the copper-plated finish on this hanger addresses that concern.

Technical Specifications

• Type: Natick Pipe Hanger
• Pipe Size: 1-1/4 inches
• Height: 12 inches
• Material: Carbon Steel
• Finish: Copper Plated
• Application: Suspend copper tubing from floor joists, horizontal applications
• Packaging Quantity: 25 per bag

Standard Information

• Brand: WARWICK HANGER
• Manufacturer Part Number: 200-10