Walter-titex 5834797 Taper Length Drill Bit 0.1875 in

Product Description

The WALTER-TITEX 5834797 is a solid carbide taper length drill bit engineered for precision hole-making in demanding industrial and machining applications. It carries a 0.1875 inch (3/16 inch) cutting diameter, a 140-degree X-treme D point angle, and a Double Point finish designed to reduce walking and improve entry accuracy. The parallel shank measures 0.2362 inches in diameter and conforms to DIN 6535 HA standards. Coolant-through capability supports high-speed deep drilling operations by evacuating chips and managing heat at the cutting edge. This bit is specified by machinists, toolroom technicians, and CNC operators working with carbide-tooling setups.

This drill bit is suited for precision machining environments where consistent hole geometry is required across a range of conditions. Rated for blind hole, cross hole, inclined hole, stack drilling, and through hole drilling applications, it handles challenging entry angles and multi-layer workpieces. The spiral flute geometry with a 12xD flute-to-diameter ratio and web-thinned, tapered web configuration promotes efficient chip evacuation and reduced thrust. It is part of the WALTER-TITEX Series A6589DPP product family, built to K30F carbide material grade for wear resistance in high-demand cutting environments.

Key Features

• Solid carbide construction in K30F grade for high wear resistance and edge stability
• Coolant-through design supports deep drilling and extends tool life in high-speed applications
• 140-degree X-treme D point with Double Point finish reduces drill walk on entry
• Web-thinned, tapered web configuration lowers cutting thrust and improves chip flow
• 12xD flute-to-diameter ratio with spiral flutes rated for maximum drilling depth of 2.9134 inches
• DIN 6535 HA parallel shank conforms to standard toolholder and collet chuck interfaces

Compatibility

Designed for use in CNC machining centers and drill presses equipped with standard DIN 6535 HA parallel shank collet chucks or toolholders accepting a 0.2362 inch shank diameter. Suitable for blind hole, cross hole, inclined hole, stack drilling, and through hole drilling operations as specified by the manufacturer.

Installation Notes

Installation and tool changes should be performed by qualified machining technicians with the spindle fully stopped and machine power locked out per applicable shop safety procedures. Ensure the collet or toolholder is clean and undamaged before seating the parallel shank to maintain concentricity. Verify coolant-through supply lines are connected and flow is confirmed before initiating deep drilling cycles. Do not exceed the manufacturer-rated maximum drilling depth of 2.9134 inches without re-evaluating cycle parameters.