Walter-titex 5058697 Jobber Drill Bit 2.9mm Hss Oxide

Product Description

The WALTER-TITEX 5058697 is a jobber-length twist drill bit designed for precision hole-making in metalworking applications. Manufactured from high speed steel with an oxide coating, this bit features a 118-degree standard point angle and a web-thinned, tapered web configuration for reduced thrust and easier chip evacuation. The 2-flute right-hand spiral flute geometry provides consistent cutting action. With an overall length of 2-13/32 inches and a flute length of 1-19/32 inches, this Series A1211 bit meets ANSI, ISO, BS, and DIN standards and is rated for high performance general-purpose drilling in production and maintenance environments.

This drill bit is suited for blind hole drilling and stack drilling operations on cast iron and steel workpieces. The straight-cylindrical shank with a diameter of 0.1142 inches fits standard drill chucks without adapters. The h8 tolerance on the drill diameter supports accurate hole sizing. It is well suited for use in machine shops, fabrication facilities, and field maintenance work where consistent results in ferrous materials are required. The 8xD flute-to-diameter ratio supports stable chip removal at a maximum drilling depth of 28.00 mm (approximately 1.102 inches).

Key Features

• High speed steel construction with oxide coating for wear resistance in ferrous materials
• 118-degree standard point angle with web-thinned, tapered web for reduced entry thrust
• 2-flute right-hand spiral geometry for efficient chip evacuation
• Straight-cylindrical shank (0.1142 inches diameter) for standard chuck compatibility
• h8 drill diameter tolerance for accurate hole sizing
• Rated for blind hole and stack drilling applications on cast iron and steel
• Meets ANSI, ISO, BS, and DIN specification designations

Compatibility

Designed for drilling cast iron and steel workpieces. Suitable for blind hole and stack drilling tool applications as specified for Series A1211 jobber-length drill bits within the 0.1000 to 0.1500 inch (2.00 to 3.00 mm) size range.

Installation Notes

Installation and use of this drill bit should be performed by qualified machinists or trade professionals familiar with metal drilling operations. Always secure the workpiece properly and ensure the drill chuck is tightened before operation. Power down and de-energize the drill press or machine tool before changing bits or adjusting chuck settings. Do not exceed the maximum drilling depth of 1.102 inches without retracting to clear chips.