Walter-titex 5058596 Jobber Drill Bit 11/64 in Hss

Product Description

The WALTER-TITEX 5058596 is a jobber-length twist drill bit designed for high-performance drilling in cast iron and steel. Built from high speed steel with an oxide coating, it delivers reliable cutting life in both blind hole and stack drilling applications. The bit features a 118-degree standard point angle, a web-thinned and tapered web configuration for reduced thrust at entry, and a right-hand spiral flute with a regular spiral type. With an overall length of 3-5/32 inches and a flute length of 1-27/32 inches, it fits standard drill chucks and magnetic drill setups without adapters.

This bit is suited for professional metalworking tasks in fabrication shops, mechanical contractors, and industrial maintenance environments. Its straight-cylindrical shank with an 11/64-inch diameter accepts standard three-jaw chucks. The Series A1211 designation places it in a well-documented general-purpose HSS line conforming to ANSI, ISO, BS, and DIN standards. Typical applications include blind hole drilling and stack drilling in cast iron and steel workpieces where consistent hole geometry and diameter tolerance are required.

Key Features

• High speed steel construction with oxide finish for corrosion resistance and reduced chip adhesion
• 118-degree standard point angle with web-thinned, tapered web for lower entry thrust
• Right-hand cut, regular spiral flute optimized for cast iron and steel
• Straight-cylindrical shank diameter of 11/64 inches fits standard drill chucks directly
• Flute-to-diameter ratio of 8xD supports deeper reach in jobber-length applications
• Meets ANSI, ISO, BS, and DIN specifications for dimensional consistency

Compatibility

Designed as a general-purpose jobber-length drill bit compatible with standard three-jaw drill chucks and drill press spindles accepting straight-cylindrical shanks. Intended primary workpiece materials are cast iron and steel.

Installation Notes

Installation and use should be performed by qualified machinists or trade professionals familiar with metal drilling operations. Secure the workpiece firmly before drilling and confirm the chuck is properly tightened on the shank to prevent slippage. Power down the drill press or hand drill completely before changing bits. Do not exceed the recommended maximum drilling depth of approximately 1.535 inches without retracting to clear chips.