Walter-titex 5058348 Jobber Drill Bit No 62 Hss Oxide

Product Description

The WALTER-TITEX 5058348 is a jobber-length drill bit in wire gauge size No. 62, with a decimal diameter of 0.0380 inches. It is manufactured from high speed steel with an oxide coating for surface protection and reduced friction. The bit features a 118-degree standard point angle, a regular spiral flute, and a web-thinned, tapered web configuration that aids chip evacuation and reduces thrust force at entry. The straight-cylindrical shank measures 0.0380 inches in diameter. Overall length is 1-5/16 inches (33.34 mm), with a flute length of 15/32 inches. This is a two-flute, right-hand cut design rated as a high-performance general-purpose drill bit. Licensed HVAC, plumbing, and electrical tradespeople as well as machining professionals are the primary installers.

This bit is suited for blind hole drilling and stack drilling applications. Primary workpiece materials include cast iron and steel, consistent with its P and K material codes under ISO classification. The 8xD flute-to-diameter ratio and maximum drilling depth of 0.3940 inches (10.00 mm) make it well matched to close-tolerance small-diameter drilling in production or field service environments where wire gauge sizing is required. Meets ANSI and ISO standards, with specification designations under BS and DIN.

Key Features

• Wire gauge No. 62 size at 0.0380 inches decimal diameter for precision small-hole work
• High speed steel construction with oxide coating for durability and friction reduction
• 118-degree standard point angle with web-thinned, tapered web for reduced entry thrust
• Right-hand cut, regular spiral flute promotes efficient chip clearance
• Suitable for blind hole and stack drilling in cast iron and steel
• Meets ANSI, ISO, BS, and DIN standards; Series A1211 general-purpose grade

Compatibility

Designed for use in standard drill chucks and collets accepting a 0.0380-inch straight-cylindrical shank. Intended for drilling cast iron and steel workpieces in blind hole and stack drilling setups per the Series A1211 general-purpose classification.

Installation Notes

Installation and use should be performed by qualified machinists or trade professionals familiar with small-diameter drill bit handling. Secure the workpiece firmly before drilling to prevent bit deflection or breakage at this diameter. Ensure the drill chuck or collet is properly tightened on the straight-cylindrical shank before operation. Follow applicable shop safety standards and manufacturer speed and feed recommendations for the workpiece material.