Wagner Motors wg840730 Condenser Fan Motor 1/2 Hp 208-230V

Product Description

The WAGNER MOTORS wg840730 is a single-speed PSC condenser fan motor rated at 1/2 HP and 1075 RPM, designed for use in ducted residential and light commercial air conditioning condensing units. Operating on 208-230 volts at 60 Hz, it draws 3.0 amps full load and carries a totally enclosed enclosure for outdoor condenser service. The motor features Class B insulation and ball bearings for reliable operation in high-ambient conditions rated up to 60 degrees C (140 degrees F). It is electrically reversible and includes automatic overload protection, making it adaptable to a range of condenser fan applications. The 36-inch leads provide adequate service length for most condenser cabinet configurations.

This motor fits ducted condenser fan applications in split-system and packaged air conditioning equipment. The standard 48-frame belly band mount allows direct retrofit into existing motor brackets without fabrication. The 5/8-inch-diameter motor body at 5.625 inches and a 1/2 inch by 5 inch shaft accommodate standard condenser fan blade hubs. HVAC technicians installing or replacing condenser fan motors in residential and light commercial cooling systems will find this motor a straightforward fit for single-speed PSC applications requiring a 10/370 run capacitor.

Key Features

• Single-speed PSC motor rated 1/2 HP at 1075 RPM
• Electrically reversible rotation for flexible installation
• Totally enclosed enclosure rated for outdoor condenser use
• Automatic overload protection built in
• Ball bearing construction for extended service life in high-ambient environments
• Belly band mount on standard 48-frame body for broad retrofit compatibility
• 36-inch leads with 60 Hz operation

Compatibility

Designed as an OEM-style replacement for single-speed PSC condenser fan motors in ducted residential and light commercial air conditioning condensing units requiring a belly band mount, 1/2 HP output, 208-230V operation, and a 10/370 run capacitor.

Installation Notes

Installation should be performed by a licensed HVAC technician. Disconnect and lock out all power to the condensing unit before removing the existing motor or handling electrical connections. Verify the replacement run capacitor rating matches the required 10/370 specification before energizing. Confirm blade pitch and hub set-screw alignment on the 1/2 inch shaft before final startup, and test rotation direction against the original unit wiring diagram.

Technical Specifications

• Horsepower: 1/2 HP
• RPM: 1075
• Voltage: 208-230 volts
• Amperage (FLA): 3.0 amps
• Frequency: 60 Hz
• Motor Type: PSC
• Speeds: 1
• Rotation: Reversible
• Enclosure: Totally Enclosed
• Insulation Class: B
• Bearing Type: Ball
• Body Diameter: 5.625 inches
• Shaft Size: 1/2 inch x 5 inches
• Mounting: Belly Band
• Capacitor: 10/370
• Temperature Rating: 60 degrees C / 140 degrees F
• Lead Length: 36 inches
• Application: Ducted

Standard Information

• Brand: WAGNER MOTORS
• Manufacturer Part Number: wg840730