Wac Lighting HR-LED87-27-BN Round Led Button Light 3000K

Product Description

The WAC LIGHTING HR-LED87-27-BN is a round LED button light designed for low-profile accent and task lighting in residential and retail environments. It operates at 24 volts with a 4.8-watt high-powered LED that delivers 180 lumens at a 3000K soft white color temperature, making it well-suited for shelves, cabinets, curio cases, and display installations. The brushed nickel finish and shallow installation depth allow it to integrate cleanly into tight spaces, whether surface mounted or recessed. All necessary mounting hardware is included, and a cutout template is provided for recessed installations. Rated for 70,000 hours, this fixture is built for long service intervals in both residential and light commercial settings.

The HR-LED87-27-BN is intended for use in fine residential interiors and retail display environments. Typical applications include under-cabinet lighting, inside cabinet interiors, shelving units, curio displays, and retail merchandise cases. Each unit ships with 72 inches of wire, allowing multiple button lights to be wired in series. Using a Class 2, 24-volt remote or plug-in transformer, up to 20 units can be connected on a single power supply circuit. Compatible power supplies include WAC LIGHTING models en-2460-rb2, en-24100-rb2, en-2460-p-ar, and en-24100-277-rb2-t.

Key Features

• 4.8-watt LED at 24 volts produces 180 lumens with a 3000K color temperature and G4 base
• Rated 70,000 hours for extended service life and reduced maintenance intervals
• Smooth and continuous dimming down to 15 percent using an electronic low-voltage (ELV) dimmer
• Can be surface mounted or recessed with all hardware and a cutout template included
• Supplied with 72 inches of wire for series wiring up to 20 units per Class 2 power supply
• UL and CUL listed for damp locations
• All-steel alloy construction in a brushed nickel finish

Compatibility

Must be used with a Class 2, 24-volt power supply. Compatible WAC LIGHTING power supply models include en-2460-rb2, en-24100-rb2, en-2460-p-ar, and en-24100-277-rb2-t. Up to 20 button lights may be wired in series on a single supply, subject to the maximum load rating of the power supply used.

Installation Notes

Installation is typically performed by a licensed electrician or a qualified lighting installer following applicable NEC guidelines for low-voltage Class 2 circuits. Before wiring, confirm the power supply is de-energized and verify the total wattage of the series run does not exceed the rated output of the transformer. For recessed installations, use the included cutout template to ensure accurate sizing. The fixture is rated for damp locations but should not be installed in direct-wet or submerged environments.